{"title":"Drainage","description":"","products":[{"product_id":"125mm-aco-raindrain-hexdrain-closing-end-cap-black","title":"125mm Aco Raindrain \/ HexDrain Closing End Cap Black","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e125mm end cap for ACO RainDrain and HexDrain channel systems, designed to securely close the end of a 1m drainage channel run. The black closing end cap prevents water and debris ingress from the open channel ends, ensuring effective performance and a neat system finish.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eManufactured from durable polypropylene, the fitting provides a precise, watertight closure when installed with compatible ACO linear drainage channels. It is suitable for both foul and surface water management in domestic paved areas such as patios, paths, and driveways subject to light use.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThis universal closing cap is compatible with 125mm wide ACO RainDrain and HexDrain channels, allowing use across both systems for straightforward on-site fitting and maintenance. \u003cbr\u003e\u003cbr\u003eThe component contributes to a complete, modular surface water management solution when used with ACO channels, outlets, and corner units.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable material\u003c\/strong\u003e: Made from high-strength polypropylene for long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure fit\u003c\/strong\u003e: Provides a watertight closure to the open end of the channel run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDebris protection\u003c\/strong\u003e: Prevents soil and waste entry to maintain clear flow through the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e: Fits ACO RainDrain and HexDrain channels of 125mm width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeat finish\u003c\/strong\u003e: Creates a clean end termination for surface drainage installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatios and paths\u003c\/strong\u003e: Seals drainage channel ends to protect against debris build-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriveways\u003c\/strong\u003e: Suitable for light-duty domestic driveways using ACO RainDrain or HexDrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThresholds\u003c\/strong\u003e: Completes linear drainage runs at garage or doorway edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarden and paved areas\u003c\/strong\u003e: Ensures a tidy, closed termination for surface water systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure the channel end is clean and free from debris before fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning\u003c\/strong\u003e: Align end cap with the channel body ensuring full engagement of clips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeating\u003c\/strong\u003e: Press firmly into place until the connection is fully secure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection\u003c\/strong\u003e: Confirm watertight fit and correct alignment with surrounding structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing\u003c\/strong\u003e: Backfill or concrete edges as required to protect and secure the assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e: Designed for use with ACO RainDrain and HexDrain 125mm channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial specification\u003c\/strong\u003e: Manufactured from recycled polypropylene in accordance with ACO system standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance function\u003c\/strong\u003e: Prevents ingress of debris and water through open channel ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Ensure correct orientation - closing end caps are non-outlet fittings and must not be used where discharge is required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771510612079,"sku":"7001112","price":7.33,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Aco_Raindrain_Hexdrain_Closing_End_Cap_Black_125mm.jpg?v=1783758535"},{"product_id":"1m-aco-hexdrain-brickslot-drain-channel-a15-loading","title":"1m Aco HexDrain Brickslot Drain Channel A15 Loading","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e1m surface water drainage channel featuring a discreet Brickslot inlet for seamless integration within paved and landscaped surfaces. \u003cbr\u003e\u003cbr\u003eThe ACO HexDrain Brickslot system provides efficient surface water collection while maintaining a minimal, unobtrusive appearance in block paving, slabbed, or decorative areas.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eManufactured from recycled polypropylene, the lightweight HexDrain channel body offers high structural rigidity and long-term durability. \u003cbr\u003e\u003cbr\u003eThe Brickslot top section incorporates a narrow 10mm slot opening that allows water entry without interrupting the surface finish, ensuring a clean, continuous visual line.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eRated to A15 loading, the system is suitable for pedestrian areas, patios, gardens, and lightly trafficked driveways. It provides the same strength and performance as standard HexDrain channels while delivering a refined architectural look ideal for domestic hard landscaping projects.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eEach 1m channel section includes interlocking ends for straightforward connection and alignment. The design integrates with ACO accessories such as end caps, corner units, and outlets, allowing complete linear drainage layouts with consistent appearance and performance.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiscreet appearance\u003c\/strong\u003e: Brickslot inlet creates a clean, continuous line within block or slab paving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e: Recycled polypropylene channel ensures easy handling and installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural rigidity\u003c\/strong\u003e: Hexagonal cell structure provides strength and stability under light loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA15 load rating\u003c\/strong\u003e: Suitable for pedestrian and light domestic applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion resistance\u003c\/strong\u003e: All-plastic construction eliminates rust and degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e: Connects with ACO HexDrain outlets and accessory components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlock paving\u003c\/strong\u003e: Ideal for paved driveways, paths, and courtyards where appearance is important.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatios and terraces\u003c\/strong\u003e: Provides discreet surface water control along paved edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePedestrian areas\u003c\/strong\u003e: Suitable for paths, garden walkways, and domestic entrances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLandscaped zones\u003c\/strong\u003e: Integrates neatly within decorative paving or hard landscaping layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel preparation\u003c\/strong\u003e: Excavate to required depth and alignment for the drainage run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Position channels on compacted concrete or stable sub-base for level installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointing\u003c\/strong\u003e: Connect channel ends using integral locking profiles for secure alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection\u003c\/strong\u003e: Link to appropriate pipe outlets, sumps, or soakaways as required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrickslot alignment\u003c\/strong\u003e: Ensure slot edge sits flush with adjacent paving for even surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge restraint\u003c\/strong\u003e: Haunch sides with concrete to maintain position and load stability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e: Certified to A15 loading in accordance with EN 1433 for pedestrian and light domestic use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial standard\u003c\/strong\u003e: Manufactured from recycled polypropylene to ACO system specifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather and UV resistance\u003c\/strong\u003e: Stable under normal environmental exposure conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic performance\u003c\/strong\u003e: Designed for efficient surface water collection through narrow slot inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Not suitable for driveways or areas subject to vehicle loading above A15 class.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771510644847,"sku":"7001107","price":22.07,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/ACO_HexDrain_Brickslot_Drain_Channel_A15_Loading_1m.jpg?v=1783758536"},{"product_id":"1m-aco-hexdrain-channel-a15-loading-with-black-plastic-grating","title":"1m Aco HexDrain Channel A15 Loading With Black Plastic Grating","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e1m surface water drainage channel designed for efficient collection and conveyance of rainwater from paved areas, paths, and driveways. \u003cbr\u003e\u003cbr\u003eThe ACO HexDrain system combines a lightweight polymer channel body with a durable black plastic grating to form a robust, easy-to-install linear drainage solution.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eManufactured from high-strength recycled polypropylene, the channel offers excellent resistance to weathering, thermal expansion, and corrosion. The honeycomb structure of the HexDrain body enhances rigidity while keeping weight low for practical handling on site.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eRated to A15 loading, the system is suitable for pedestrian areas, patios, gardens, and light-use driveways where only foot traffic or lightweight domestic vehicles occur. The black grating provides a discreet surface finish that blends cleanly with most paving materials.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eEach 1m channel length features an interlocking end profile for fast connection and alignment, forming a continuous drainage run. \u003cbr\u003e\u003cbr\u003eThe design allows straightforward cutting and joining, and can be used with compatible ACO accessories including sump units, corner connectors, and end caps for complete system integration.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e: Manufactured from recycled polypropylene for easy handling and installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural rigidity\u003c\/strong\u003e: Hexagonal body design provides strength and stability under light loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion resistance\u003c\/strong\u003e: Non-metallic materials eliminate risk of rusting or degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiscreet appearance\u003c\/strong\u003e: Black plastic grating blends with most surface finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick connection\u003c\/strong\u003e: Interlocking channel ends enable rapid on-site assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e: Connects with ACO HexDrain outlets, corners, and accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal size\u003c\/strong\u003e: 1m surface water channel rated to A15 loading class.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatios and paths\u003c\/strong\u003e: Provides surface water collection along paved or landscaped areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriveways\u003c\/strong\u003e: Suitable for light-use domestic driveways with occasional vehicle loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarden drainage\u003c\/strong\u003e: Helps manage rainfall run-off around lawns and borders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePedestrian areas\u003c\/strong\u003e: Ideal for walkways, terraces, and courtyards subject to foot traffic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel placement\u003c\/strong\u003e: Lay channels to the designed alignment and gradient.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Install on a compacted concrete or stable sub-base to maintain level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointing\u003c\/strong\u003e: Connect channel ends using the integral locking system for secure joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection\u003c\/strong\u003e: Attach to suitable pipe outlets or soakaway systems as required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrating fitting\u003c\/strong\u003e: Clip black plastic grating firmly into place before concreting edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing\u003c\/strong\u003e: Ensure surface paving sits level with grating top for smooth drainage flow.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e: Certified to A15 loading for pedestrian and light domestic applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial standard\u003c\/strong\u003e: Manufactured in accordance with EN 1433 for linear drainage channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature resistance\u003c\/strong\u003e: Stable under normal environmental conditions and UV exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater management\u003c\/strong\u003e: Designed to maintain efficient surface run-off collection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Not suitable for areas subject to regular vehicular traffic exceeding A15 rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771510677615,"sku":"7001105","price":13.48,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/ACO_HexDrain_Channel_A15_Loading_with_Black_Plastic_Grating_1m.jpg?v=1783758536"},{"product_id":"1m-aco-hexdrain-channel-with-galvanised-grating-125mm-x-80mm","title":"1m Aco HexDrain Channel With Galvanised Grating 125mm x 80mm","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e1m surface water drainage channel designed for efficient collection and conveyance of rainwater from domestic paved areas, patios, paths, and garage thresholds.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe ACO HexDrain system combines a lightweight recycled polypropylene channel body with a robust galvanised steel grating to create a strong, corrosion-resistant linear drainage solution.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eManufactured from high-strength recycled plastic, the channel offers excellent resistance to impact, weathering, and chemical exposure. Its honeycomb structure provides rigidity and stability while keeping weight low for straightforward on-site handling and installation.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eRated to A15 loading, this galvanised steel grating variant is suitable for pedestrian areas, patios, and light-use domestic spaces where occasional lightweight traffic may occur. The metallic grating provides a durable, slip-resistant finish that complements concrete, stone, or block paving.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eEach 1m channel section includes interlocking ends for fast, secure connection, forming a continuous run for surface water control. \u003cbr\u003e\u003cbr\u003eThe design allows simple cutting and joining and is compatible with ACO accessories including sump units, corner connectors, and end caps for a complete system configuration.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e: Recycled polypropylene channel for easy handling and installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanised steel grating\u003c\/strong\u003e: Provides enhanced durability and corrosion resistance for domestic use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural rigidity\u003c\/strong\u003e: Hexagonal cell design offers strength and stability under A15 loading conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable performance\u003c\/strong\u003e: Suitable for pedestrian and light-use outdoor applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick connection\u003c\/strong\u003e: Interlocking channel ends enable accurate alignment and continuous runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e: Integrates with ACO HexDrain outlets, corners, and accessory fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatios and paths\u003c\/strong\u003e: Provides efficient surface water collection along paved areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarage thresholds\u003c\/strong\u003e: Ideal for water control at domestic entrances and garage edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarden drainage\u003c\/strong\u003e: Manages surface run-off in landscaped areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePedestrian zones\u003c\/strong\u003e: Suitable for light-traffic areas such as walkways and courtyards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel placement\u003c\/strong\u003e: Lay channels to designed line and fall for efficient drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Install on a compacted concrete or stable sub-base for full support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointing\u003c\/strong\u003e: Connect channel ends using the built-in locking system to ensure secure joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection\u003c\/strong\u003e: Link to suitable pipework or soakaway systems using compatible ACO outlets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrating fitting\u003c\/strong\u003e: Secure galvanised steel grating firmly in position before concreting edges.\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eFinishing\u003c\/strong\u003e: Ensure paving is laid level with the grating top to maintain smooth surface drainage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e: Certified to A15 under BS EN 1433 for pedestrian and light domestic applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial standard\u003c\/strong\u003e: Manufactured from recycled polypropylene with galvanised steel grating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion resistance\u003c\/strong\u003e: Galvanised finish provides protection against rust and weathering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature and UV stability\u003c\/strong\u003e: Resistant to normal outdoor environmental exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Intended for pedestrian and light domestic areas only; not suitable for vehicle traffic exceeding A15 loading class.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771510710383,"sku":"7001110","price":14.94,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/ACO_HexDrain_Channel_Galvanised_Grating_1m_x_125_x_80mm.jpg?v=1783758537"},{"product_id":"1m-aco-raindrain-channel-with-galvanised-steel-grating","title":"1m Aco RainDrain Channel With Galvanised Steel Grating","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e1m surface water drainage channel designed for the effective collection and discharge of rainwater from paved areas, driveways, and paths. \u003cbr\u003e\u003cbr\u003eThe ACO RainDrain system combines a strong polymer concrete channel body with a galvanised steel grating for enhanced durability and long-term performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eEngineered for domestic and light commercial applications, the channel provides a robust and efficient means of managing surface run-off. The galvanised steel top grating resists corrosion, impact, and wear from frequent foot traffic, making it ideal for regularly used outdoor spaces.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eEach 1m unit incorporates interlocking ends for quick alignment and secure connection, forming a continuous linear drainage run. The channel profile promotes smooth water flow to the outlet, ensuring efficient surface drainage even in heavy rainfall conditions.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eRainDrain channels are compatible with a full range of ACO accessories, including sump units, outlet adaptors, and end caps, allowing full system flexibility and straightforward installation on site.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e: Polymer concrete body provides strength and long-term stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanised steel grating\u003c\/strong\u003e: Offers superior wear resistance and corrosion protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable drainage\u003c\/strong\u003e: Smooth internal surface promotes efficient water flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick connection\u003c\/strong\u003e: Interlocking ends enable accurate alignment and fast assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e: Fully compatible with ACO RainDrain outlets and fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile use\u003c\/strong\u003e: Suitable for domestic driveways, patios, and paved walkways.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriveways\u003c\/strong\u003e: Suitable for domestic vehicle areas and garage thresholds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatios and terraces\u003c\/strong\u003e: Provides reliable run-off control for paved surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaths and walkways\u003c\/strong\u003e: Ideal for pedestrian areas with frequent foot traffic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCourtyards and entrances\u003c\/strong\u003e: Manages surface water where hardstanding meets buildings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Excavate to required alignment and depth for the drainage run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Set channel on a compacted concrete or stable base for accurate level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Join channels using the integral locking system to form a continuous run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet fitting\u003c\/strong\u003e: Connect to drainage outlets or soakaway systems as specified.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge finishing\u003c\/strong\u003e: Secure channel sides with concrete haunching to prevent movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrating installation\u003c\/strong\u003e: Clip galvanised steel grating firmly into position before final surfacing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating\u003c\/strong\u003e: Manufactured to meet EN 1433 Class A15 for pedestrian and light domestic traffic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial standard\u003c\/strong\u003e: Complies with ACO system specifications for polymer concrete channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion resistance\u003c\/strong\u003e: Galvanised steel grating provides long-lasting surface protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic performance\u003c\/strong\u003e: Designed for efficient surface water collection and discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Not suitable for heavy vehicle areas exceeding A15 loading class.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771510743151,"sku":"7001106","price":27.22,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/ACO_RainDrain_B125_Channel_with_Cast_Iron_Grating_1mtr.jpg?v=1783758538"},{"product_id":"1m-aco-threshold-drain-with-black-aluminium-grating-plastic-casing-60mm-x-100mm","title":"1m Aco Threshold Drain With Black Aluminium Grating \/ Plastic Casing 60mm x 100mm","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e1m low-profile surface water drainage channel designed for threshold and entrance applications. The ACO Threshold Drain combines a slim 60mm x 100mm plastic channel body with a high-quality black aluminium grating, providing discreet yet effective protection against rainwater ingress at doorways, patios, and paved entrances.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eManufactured from tough, lightweight polypropylene, the channel casing offers strength, stability, and resistance to corrosion. The black aluminium grating delivers a durable and modern finish that integrates neatly with contemporary paving and door profiles.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eIts compact dimensions make it ideal for installations where space or ground depth is limited. The narrow cross-section allows the system to sit flush against door thresholds, collecting surface water efficiently while maintaining a clean and unobtrusive appearance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSuitable for pedestrian thresholds, patios, and light-traffic entrance zones (subject to correct load rating). The system is designed to integrate with ACO’s drainage accessory range, enabling connection to underground pipework or soakaway systems via compatible outlet fittings (as supplied for the specific product variant).\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-profile design\u003c\/strong\u003e: 60mm x 100mm dimensions allow installation in shallow or restricted spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e: Tough polypropylene casing with black aluminium grating for long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiscreet appearance\u003c\/strong\u003e: Slim profile complements modern doors and paving finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficient drainage\u003c\/strong\u003e: Collects surface water directly at the threshold to prevent pooling or ingress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight assembly\u003c\/strong\u003e: Easy to handle, cut, and install on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e: Connects with ACO Threshold Drain accessories and outlet adaptors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor thresholds\u003c\/strong\u003e: Prevents rainwater ingress at patio and bi-fold doorways.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatios and terraces\u003c\/strong\u003e: Provides low-level surface water control along paved edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaths and entrances\u003c\/strong\u003e: Suitable for light pedestrian areas adjacent to buildings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarage or garden rooms\u003c\/strong\u003e: Ideal for narrow access points requiring shallow drainage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Excavate to correct depth allowing for concrete bedding and channel height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Lay channel on stable, level concrete bed ensuring correct alignment at doorway.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Attach outlet to suitable drainage pipe or soakaway system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrating fitting\u003c\/strong\u003e: Secure black aluminium grating after installation and alignment checks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge finishing\u003c\/strong\u003e: Set adjacent paving level with grating top for smooth surface transition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal inspection\u003c\/strong\u003e: Confirm secure seating and unobstructed water flow before completion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial standard\u003c\/strong\u003e: Manufactured from polypropylene with corrosion-resistant aluminium grating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather resistance\u003c\/strong\u003e: Stable under normal temperature variations and UV exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater management\u003c\/strong\u003e: Designed to divert rainfall away from building thresholds efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Not suitable for driveways or areas exposed to regular vehicle traffic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Black","offer_id":53771510775919,"sku":"7001109","price":35.96,"currency_code":"GBP","in_stock":false},{"title":"Silver","offer_id":53771510808687,"sku":"7001108","price":35.96,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Aco_Black_Aluminium_Threshold_Drain.jpg?v=1783758539"},{"product_id":"300mm-inspection-chamber-base-5-adjustable-inlets","title":"300mm Inspection Chamber Base 5 Adjustable Inlets","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e300mm Inspection Chamber Base with 5 Adjustable Inlets designed for use in underground drainage systems. \u003cbr\u003e\u003cbr\u003eManufactured for reliable access and maintenance, this base supports both foul and surface water applications in compliance with current drainage standards.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe chamber base provides a secure, durable foundation within the inspection chamber assembly, ensuring long-term performance under load. \u003cbr\u003e\u003cbr\u003eIts five adjustable inlets allow flexible pipework configurations, making it suitable for complex layouts where multiple connections are required.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003ePrecision-moulded in high-quality materials, the base delivers consistent strength and resistance to water ingress. The design supports straightforward installation and integration with standard 300mm inspection chamber risers and covers.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eIts adaptability and robust manufacture provide a dependable solution for access, inspection, and maintenance.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e: Manufactured from robust, long-lasting material resistant to underground conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile connections\u003c\/strong\u003e: Five adjustable inlets provide multiple pipework configuration options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable performance\u003c\/strong\u003e: Suitable for both foul and surface water drainage systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy integration\u003c\/strong\u003e: Compatible with standard 300mm risers and covers for a complete system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal size\u003c\/strong\u003e: 300mm inspection chamber base with 5 adjustable inlets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderground drainage\u003c\/strong\u003e: Provides secure inspection access for foul and surface water systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential projects\u003c\/strong\u003e: Suitable for domestic underground drainage layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight commercial works\u003c\/strong\u003e: Practical for smaller commercial drainage installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance access\u003c\/strong\u003e: Enables safe and efficient inspection and cleaning of pipe runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcavation\u003c\/strong\u003e: Prepare base excavation to the required depth and dimensions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Position on a level granular bedding to ensure stable placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Attach inlet and outlet pipes securely using appropriate seals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly\u003c\/strong\u003e: Fit with compatible risers and covers to achieve required chamber height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with suitable granular material and compact in layers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial standard\u003c\/strong\u003e: Manufactured in accordance with relevant drainage component standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity\u003c\/strong\u003e: Designed to withstand normal ground loadings when correctly installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem suitability\u003c\/strong\u003e: Approved for use in foul and surface water applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation compliance\u003c\/strong\u003e: Meets Building Regulations for underground drainage access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Ensure safe handling during installation; use correct lifting techniques.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Base","offer_id":53771510841455,"sku":"7001402","price":81.38,"currency_code":"GBP","in_stock":false},{"title":"Riser","offer_id":53771510874223,"sku":"7001403","price":24.96,"currency_code":"GBP","in_stock":false},{"title":"Cover","offer_id":53771510906991,"sku":"7001404","price":45.02,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/D800_300mm_Inspection_Chamber_Base_5_Adjustable_Inlets_-_Photo.jpg?v=1783758539"},{"product_id":"450mm-inspection-chamber-base-160mm-110mm-inlets","title":"450mm Inspection Chamber Base 160mm\/110mm Inlets","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e450mm inspection chamber base designed for underground foul and surface water drainage systems. This component provides dependable access for inspection, cleaning, and maintenance while accommodating both 160mm and 110mm drainage pipe connections.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eManufactured from high-strength, durable polypropylene, the base ensures long-term structural integrity and watertight performance under load. Its multiple inlets allow direct connection of mixed-diameter pipework, making it suitable for system layouts where 160mm mains and 110mm branch lines converge.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eCommonly used as a connection point within larger domestic and light commercial installations, the 450mm base enables straightforward transitions between different pipe sizes without additional fittings. It supports flexible system design at junctions, changes in direction, or depth variations.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eDesigned for use with standard 450mm risers and covers, the component forms part of a modular assembly providing safe and efficient access to underground drainage networks. Its robust manufacture and precise jointing design ensure lasting performance in a range of site conditions.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-size connectivity\u003c\/strong\u003e: Accepts both 160mm and 110mm pipe diameters for adaptable installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e: Produced from high-strength polypropylene for long-term underground use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple inlets\u003c\/strong\u003e: Allows versatile layout options for connecting main and branch drainage runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced accessibility\u003c\/strong\u003e: 450mm chamber diameter provides improved access for rodding and inspection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable performance\u003c\/strong\u003e: Suitable for foul and surface water applications in domestic and light commercial systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy integration\u003c\/strong\u003e: Compatible with standard 450mm risers and covers for a complete chamber assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderground drainage\u003c\/strong\u003e: Provides secure inspection access for foul and surface water systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe junctions\u003c\/strong\u003e: Connects multiple 160mm and 110mm pipes within a single chamber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential drainage\u003c\/strong\u003e: Suitable for larger domestic systems with mixed pipe diameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight commercial works\u003c\/strong\u003e: Used in small commercial networks requiring enhanced access points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance access\u003c\/strong\u003e: Enables inspection and cleaning of main and branch drainage runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcavation\u003c\/strong\u003e: Prepare excavation to suit chamber base dimensions and required invert level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Position on a compacted granular bed to ensure full support and alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe connection\u003c\/strong\u003e: Insert 160mm or 110mm pipes into the correct inlets using compatible seals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly\u003c\/strong\u003e: Fit with 450mm risers and a suitable cover and frame for surface access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with granular material and compact evenly in layers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling\u003c\/strong\u003e: Lift carefully to prevent damage to inlet sockets or seals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial standard\u003c\/strong\u003e: Manufactured in accordance with industry standards for underground drainage components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity\u003c\/strong\u003e: Designed to withstand normal ground and installation loadings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe compatibility\u003c\/strong\u003e: Accepts standard EN 1401 110mm and 160mm uPVC drainage pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem suitability\u003c\/strong\u003e: Approved for use in foul and surface water drainage networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation compliance\u003c\/strong\u003e: Meets Building Regulations for underground access chambers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Ensure correct sealing rings are used when connecting pipes of different diameters to maintain watertight performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771510939759,"sku":"7001408","price":73.45,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/6D900_450mm_Inspection_Chamber_Base_160mm110mm_Inlets_-_Photo.jpg?v=1783758540"},{"product_id":"450mm-inspection-chamber-base-5-adjustable-inlets","title":"450mm Inspection Chamber Base 5 Adjustable Inlets","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e450mm inspection chamber base with multiple fixed inlets designed for use in underground drainage systems. \u003cbr\u003e\u003cbr\u003eDeveloped to provide dependable access for inspection, maintenance, and rodding of foul and surface water pipework, this larger base size is suited to both domestic and light commercial installations.\u003cbr\u003e\u003cbr\u003eManufactured from high-strength, durable materials, the base delivers reliable long-term performance under load while maintaining watertight integrity. Its multiple inlets accommodate various pipe connection layouts, making it suitable for junctions, changes in direction, or complex drainage configurations.\u003cbr\u003e\u003cbr\u003eCommonly used as a connection hub for pipework, the component allows several 110mm or 160mm pipes to converge at a single access point. It also serves as a transition between pipe gradients or levels, providing a chambered section that maintains flow performance across vertical changes.\u003cbr\u003e\u003cbr\u003eIn addition, the 450mm base may be installed as an intermediate access point between manholes, typically every 45 metres on straight drainage runs, offering a practical and economical solution for system maintenance.\u003cbr\u003e\u003cbr\u003eThe design integrates precisely with standard 450mm risers and covers, providing a secure, modular assembly that ensures straightforward installation and long-term operational reliability.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e: Manufactured from robust, long-lasting material resistant to underground conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple connections\u003c\/strong\u003e: Incorporates several fixed inlets for flexible drainage layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced accessibility\u003c\/strong\u003e: Larger 450mm chamber diameter provides improved access for rodding and inspection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable performance\u003c\/strong\u003e: Suitable for both foul and surface water drainage systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy integration\u003c\/strong\u003e: Compatible with standard 450mm risers and covers for a complete system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderground drainage\u003c\/strong\u003e: Provides secure inspection access for foul and surface water systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDomestic and mainline drainage\u003c\/strong\u003e: Suitable for larger underground systems requiring improved access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight commercial works\u003c\/strong\u003e: Practical for small commercial drainage installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe junctions and changes\u003c\/strong\u003e: Commonly used where multiple pipes converge or directions change.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermediate access\u003c\/strong\u003e: Installed between manholes to allow regular inspection points on long runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance access\u003c\/strong\u003e: Enables safe and efficient inspection and cleaning of pipe runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcavation\u003c\/strong\u003e: Prepare base excavation to the required depth and footprint for 450mm component size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Position on a level granular bedding to ensure stable placement and full support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Securely attach 110mm or 160mm inlet and outlet pipes using appropriate seals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembly\u003c\/strong\u003e: Fit with compatible 450mm risers and covers to achieve required chamber height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with suitable granular material and compact in layers for stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling\u003c\/strong\u003e: Use safe lifting techniques or mechanical aids where necessary due to component size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial standard\u003c\/strong\u003e: Manufactured in accordance with relevant drainage component standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity\u003c\/strong\u003e: Designed to withstand higher ground loadings suitable for larger inspection points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem suitability\u003c\/strong\u003e: Approved for use in foul and surface water applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation compliance\u003c\/strong\u003e: Meets Building Regulations for underground drainage access and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Base","offer_id":53771510972527,"sku":"7001405","price":124.36,"currency_code":"GBP","in_stock":false},{"title":"Riser","offer_id":53771511005295,"sku":"7001406","price":30.14,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/D900_450mm_Inspection_Chamber_Base_5_Adjustable_Inlets_-_Photo.jpg?v=1783758541"},{"product_id":"110mm-air-admittance-valve-black","title":"110mm Air Admittance Valve Black","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Black","offer_id":53771511038063,"sku":"7001429","price":54.34,"currency_code":"GBP","in_stock":false},{"title":"Grey","offer_id":53771511070831,"sku":"7001430","price":54.34,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/110mm_Air_Admittance_Valve_Black.jpg?v=1783758541"},{"product_id":"110mm-double-socket-slip-coupler-black","title":"110mm Double Socket Slip Coupler Black","description":"\u003cp\u003e110mm Double Socket Slip Coupler Black forms a push-fit joint between two lengths of 110mm soil pipes, ensuring secure connections in plumbing systems.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Double Socket \/ Black","offer_id":53771511300207,"sku":"7001334","price":12.08,"currency_code":"GBP","in_stock":false},{"title":"Double Socket \/ Grey","offer_id":53771511332975,"sku":"7001335","price":12.08,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ Black","offer_id":53771511365743,"sku":"7001330","price":9.1,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ Grey","offer_id":53771511398511,"sku":"7001331","price":9.1,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/110mm_Double_Socket_Slip_Coupler_Black.jpg?v=1783758542"},{"product_id":"110mm-soil-access-bend-single-socket-92-5-degree-black","title":"110mm Soil Access Bend Single Socket 92.5 Degree Black","description":"\u003cp\u003e110mm Soil Access Bend Single Socket 92.5 Degree Black, made of durable uPVC, facilitates high-temperature waste discharge, testing, and maintenance. Silicone lubricant aids jointing for ease of use.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771511431279,"sku":"7001305","price":34.4,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SB413B_Access_Bend_110m_92.5_Degree_Single_Socket.jpg?v=1783758543"},{"product_id":"110mm-soil-access-bend-single-socket-92-5-degree-grey","title":"110mm Soil Access Bend Single Socket 92.5 Degree Grey","description":"\u003cp\u003e110mm Soil Access Bend Single Socket 92.5 Degree Grey, made of durable uPVC, facilitates high-temperature waste discharge, testing, and maintenance. Silicone lubricant aids jointing for ease of use.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771511464047,"sku":"7001306","price":34.4,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SB413G_Access_Bend_110m_92.5_Degree_Single_Socket.jpg?v=1783758543"},{"product_id":"110mm-soil-access-pipe-single-socket-black","title":"110mm Soil Access Pipe Single Socket Black","description":"\u003cp\u003e110mm Soil Access Pipe Single Socket Black features two boss connections for versatile access in soil systems. Durable and easy to install for reliable household pipework.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Black","offer_id":53771511496815,"sku":"7001284","price":17.24,"currency_code":"GBP","in_stock":false},{"title":"Grey","offer_id":53771511529583,"sku":"7001285","price":17.24,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SA43B_Access_Pipe_110mm_2_Boss_Single_Socket.jpg?v=1783758544"},{"product_id":"110mm-soil-adjustable-bend-0-90-degree-grey","title":"110mm Soil Adjustable Bend 0-90 Degree Grey","description":"\u003cp\u003e110mm Soil Adjustable Bend 0-90 Degree Grey provides versatile soil system redirection, offering flexibility from 0 to 90 degrees for optimal installation adaptability.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771511562351,"sku":"7001291","price":17.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SAB90G_Adjustable_Bend_Ring_Seal_Spigot_110mm_0_to_90_Degree.jpg?v=1783758545"},{"product_id":"110mm-soil-bend-double-socket-92-5-degree-black","title":"110mm Soil Bend Double Socket 92.5 Degree Black","description":"\u003cp\u003e110mm Soil Bend Double Socket 92.5 Degree Black provides sturdy connections in soil systems, featuring a 92.5-degree angle with dual sockets for versatile installation.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Double Socket \/ 92.5 Degree \/ Black","offer_id":53771511595119,"sku":"7001307","price":16.88,"currency_code":"GBP","in_stock":false},{"title":"Double Socket \/ 92.5 Degree \/ Grey","offer_id":53771511627887,"sku":"7001308","price":16.88,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ 112.5 Degree \/ Black","offer_id":53771511660655,"sku":"7001301","price":16.01,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ 112.5 Degree \/ Grey","offer_id":53771511693423,"sku":"7001302","price":16.01,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ 135 Degree \/ Black","offer_id":53771511726191,"sku":"7001303","price":16.01,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ 135 Degree \/ Grey","offer_id":53771511758959,"sku":"7001304","price":16.01,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ 92.5 Degree \/ Black","offer_id":53771511791727,"sku":"7001299","price":16.01,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ 92.5 Degree \/ Grey","offer_id":53771511824495,"sku":"7001300","price":16.01,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SB417B_Double_Socket_Bend_110m_92.5_Degree_Double_Socket.jpg?v=1783758545"},{"product_id":"110mm-soil-equal-branch-double-socket-112-5-degree-black","title":"110mm Soil Equal Branch Double Socket 112.5 Degree Black","description":"\u003cp\u003e110mm Soil Equal Branch Double Socket 2 Boss 112.5 Degree Black connects horizontal and vertical pipe runs, facilitating toilet pipe connection to the main soil stack.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"112.5 Degree \/ Black","offer_id":53771511857263,"sku":"7001352","price":37.43,"currency_code":"GBP","in_stock":false},{"title":"112.5 Degree \/ Grey","offer_id":53771511890031,"sku":"7001353","price":37.43,"currency_code":"GBP","in_stock":false},{"title":"135 Degree \/ Black","offer_id":53771511922799,"sku":"7001354","price":37.43,"currency_code":"GBP","in_stock":false},{"title":"135 Degree \/ Grey","offer_id":53771511955567,"sku":"7001355","price":37.43,"currency_code":"GBP","in_stock":false},{"title":"92.5 Degree \/ Black","offer_id":53771511988335,"sku":"7001350","price":37.43,"currency_code":"GBP","in_stock":false},{"title":"92.5 Degree \/ Grey","offer_id":53771512021103,"sku":"7001351","price":37.43,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/ST403B_Single_Branch_110mm_112.5_Degree_Equal.jpg?v=1783758546"},{"product_id":"110mm-soil-pipe-saddle-clip-black","title":"110mm Soil Pipe Saddle Clip Black (5\/Pack)","description":"\u003cp\u003e110mm Soil Pipe Saddle Clip Black ensures stability by supporting the soil stack around the pipe in plumbing installations.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Black","offer_id":53771512053871,"sku":"7001311","price":12.5,"currency_code":"GBP","in_stock":false},{"title":"Grey","offer_id":53771512086639,"sku":"7001312","price":12.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SC43B_Pipe_Clips_110mm_Pipe_Saddle.jpg?v=1783758547"},{"product_id":"110mm-soil-reducer-black-110mm-x-68mm","title":"110mm Soil Reducer Black 110mm x 68mm","description":"\u003cp\u003e110mm Soil Reducer Black, measuring 110mm x 82mm, facilitates efficient waste water drainage and foul discharge. Made of PVC-U, it's durable, lightweight, and suitable for high-temperature waste discharge.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Black \/ 128m","offer_id":53771512119407,"sku":"7001319","price":11.57,"currency_code":"GBP","in_stock":false},{"title":"Grey \/ 128mm","offer_id":53771512152175,"sku":"7001320","price":11.57,"currency_code":"GBP","in_stock":false},{"title":"Grey \/ 135mm","offer_id":53771512184943,"sku":"7001318","price":11.57,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SD46B_Reducers_110mm_To_68mm_Rainwater.jpg?v=1783758548"},{"product_id":"110mm-soil-screwed-access-cap-spigot-tail-black","title":"110mm Soil Screwed Access Cap Spigot Tail Black","description":"\u003cp\u003ePolypipe's 110mm Soil Screwed Access Cap Spigot Tail Black facilitates easy rodding and testing with a screw-off lid. Moisture-resistant PVC, meets BS 4514 standards, suitable for hot\/cold water.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Black","offer_id":53771512217711,"sku":"7001286","price":15.44,"currency_code":"GBP","in_stock":false},{"title":"Grey","offer_id":53771512250479,"sku":"7001287","price":15.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SA62B_Screwed_Access_Plug_And_Cap_110mm_Spigot_Tail.jpg?v=1783758549"},{"product_id":"110mm-soil-socket-clip-black","title":"110mm Soil Socket Clip Black","description":"\u003cp\u003e110mm Soil Socket Clip Black supports the soil stack around socketed fittings. Larger than pipe clips, they're specifically designed for fitting around fittings, not for general pipe support.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Black","offer_id":53771512283247,"sku":"7001313","price":2.26,"currency_code":"GBP","in_stock":false},{"title":"Grey","offer_id":53771512316015,"sku":"7001314","price":2.26,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SC45B_Pipe_Clips_110mm_Socket.jpg?v=1783758550"},{"product_id":"110mm-soil-socket-plug-black","title":"110mm Soil Socket Plug Black","description":"\u003cp\u003e110mm Soil Socket Plug Black caps off sections of the soil pipe system, commonly used temporarily during construction or permanently when a sanitary appliance is removed.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Black","offer_id":53771512348783,"sku":"7001337","price":11.14,"currency_code":"GBP","in_stock":false},{"title":"Grey","offer_id":53771512381551,"sku":"7001336","price":11.14,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SH46B_Socket_Plug_110mm.jpg?v=1783758551"},{"product_id":"110mm-soil-vent-cowl-black","title":"110mm Soil Vent Cowl Black","description":"\u003cp\u003e110mm Soil Vent Cowl Black, or Mushroom Vent Cowl, allows air to escape soil stacks above roof level, fitting over 110mm plain-ended pipes and can be solvent welded for security.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771512414319,"sku":"7001315","price":17.81,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SCV40B_Vent_Cowl_110mm.jpg?v=1783758551"},{"product_id":"110mm-soil-vent-terminal-black","title":"110mm Soil Vent Terminal Black","description":"\u003cp\u003e110mm Soil Vent Terminal Black is commonly used to prevent debris and small animals like birds and squirrels from entering soil systems.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771512447087,"sku":"7001361","price":4.34,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SV42B_Vent_Terminal_110mm.jpg?v=1783758552"},{"product_id":"110mm-soil-vent-terminal-grey","title":"110mm Soil Vent Terminal Grey","description":"\u003cp\u003e110mm Soil Vent Terminal Grey, commonly known as a Bird Cage, sits atop soil and vent pipes to prevent bird entry, crucial for plumbing and roofing installations.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771512479855,"sku":"7001310","price":4.49,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SV42G_110mm_Soil_Vent_Terminal_Grey.jpg?v=1783758552"},{"product_id":"110mm-soil-weathering-apron-black","title":"110mm Soil Weathering Apron Black","description":"\u003cp\u003e110mm Soil Weathering Apron Black, crafted from polyvinyl chloride, diverts water to prevent entry into buildings. Weatherproof and moisture-resistant, ensuring effective protection.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Black","offer_id":53771512512623,"sku":"7001362","price":7.26,"currency_code":"GBP","in_stock":false},{"title":"Grey","offer_id":53771512545391,"sku":"7001363","price":7.26,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SV48B_Weathering_Apron_110mm.jpg?v=1783758553"},{"product_id":"110mm-soil-pipe-single-socket-black-3m","title":"110mm Soil Pipe Single Socket Black 3m","description":"\u003cp\u003e110mm Soil Pipe Single Socket Black 3m is perfect for building a soil stack. Start from the base and work upwards, using silicone lubricant to aid jointing for seamless connections.\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Single Socket \/ 3000mm \/ Black","offer_id":53771512578159,"sku":"7001344","price":22.54,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ 2000mm \/ Grey","offer_id":53771512610927,"sku":"7001343","price":27.12,"currency_code":"GBP","in_stock":false},{"title":"Single Socket \/ 3000mm \/ Grey","offer_id":53771512643695,"sku":"7001345","price":22.54,"currency_code":"GBP","in_stock":false},{"title":"Plain End \/ 3000mm \/ Black","offer_id":53771512676463,"sku":"7001280","price":22.54,"currency_code":"GBP","in_stock":false},{"title":"Plain End \/ 3000mm \/ Grey","offer_id":53771512709231,"sku":"7001281","price":22.54,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/SP430B_Single_Socket_Pipe_110mm_Length.jpg?v=1783758554"},{"product_id":"110mm-drainage-back-inlet-bottle-gulley-rectangular-grid","title":"110mm Drainage Back Inlet Bottle Gulley Rectangular Grid","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Back Inlet Bottle Gully with rectangular grid, manufactured from durable uPVC to BS EN 1401-1. Designed to intercept surface water from paved areas, patios, or downpipes, the gully directs flow into underground drainage while trapping debris at ground level.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe bottle gully incorporates an integral water trap that prevents foul odours from venting from the system, maintaining hygienic conditions around the installation. \u003cbr\u003e\u003cbr\u003eIts back inlet feature allows connection from an additional 110mm pipe, enabling multiple drainage lines to feed into the same gully.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe rectangular grid prevents leaves, litter, and other debris from entering the system and can be removed to provide direct rodding access for cleaning and maintenance.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple connections: \u003c\/strong\u003e110mm main outlet plus optional back inlet for additional pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdour prevention\u003c\/strong\u003e: Integral water trap seals the system against foul gases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRectangular grid\u003c\/strong\u003e: Prevents debris ingress while sitting flush with paved surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRodding access\u003c\/strong\u003e: Cover is removable, giving direct access for maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003euPVC construction\u003c\/strong\u003e: Strong, lightweight, and resistant to rot, corrosion, and ground chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards compliant\u003c\/strong\u003e: Manufactured to BS EN 1401-1 for use in foul and surface water systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatio and driveway drainage\u003c\/strong\u003e: Collects surface water and prevents pooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDownpipe discharge\u003c\/strong\u003e: Receives rainwater from roof downpipes into the underground system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary inlet use\u003c\/strong\u003e: Connects an additional 110mm drainage pipe via the back inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlockage prevention\u003c\/strong\u003e: Stops debris entering the system while allowing rodding access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential and commercial systems\u003c\/strong\u003e: Suitable for a wide range of foul and surface water drainage layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcavation\u003c\/strong\u003e: Bed the gully on compacted granular material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections\u003c\/strong\u003e: Attach 110mm plain-ended pipework to the main outlet and back inlet using push-fit sockets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid placement\u003c\/strong\u003e: Seat the rectangular cover flush with paving or ground level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with concrete or granular fill to prevent movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance\u003c\/strong\u003e: Remove the grid periodically to clear silt or debris and ensure the trap remains effective.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm outlets with rectangular grid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Back inlet bottle gully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: uPVC with durable plastic grating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e: Provides water trap odour protection and debris interception.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to weathering, chemicals, and long-term burial.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771512741999,"sku":"7001399","price":48.7,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/D530_110mm_Drainage_Back_Inlet_Bottle_Gulley_Rectangular_Grid_-_Photo.jpg?v=1783758555"},{"product_id":"110mm-15-degree-double-socket-short-radius-bend","title":"110mm Drainage Bend Double Socket 15 Degree","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Underground Drainage Bend manufactured from uPVC, conforming to BS EN 1401-1 for use in foul and surface water systems.\u003cbr\u003e\u003cbr\u003eIts uPVC construction provides strength, durability, and long-term resistance to corrosion and chemical attack.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThis fitting connects via a double push-fit socket to plain-ended 110mm pipework, ensuring a secure and watertight joint without additional couplers. \u003cbr\u003e\u003cbr\u003eSupplied as a 15° bend, it is used for gentle alignment adjustments and shallow deflections in underground pipe runs.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust uPVC body\u003c\/strong\u003e: Strong and durable material for long service life underground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion resistant\u003c\/strong\u003e: Will not rust, rot, or degrade when buried.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatertight push-fit seal\u003c\/strong\u003e: Ensures leak-free connections in foul and surface water systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight handling\u003c\/strong\u003e: Easy to transport, cut, and install on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick installation\u003c\/strong\u003e: Pipes push directly into the socket without special tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15° bend\u003c\/strong\u003e: Provides a shallow change in direction for small realignments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble socket connection\u003c\/strong\u003e: Joins two plain-ended pipes directly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment corrections\u003c\/strong\u003e: Adjusts for minor deviations in trench layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow deflections\u003c\/strong\u003e: Introduces gradual direction changes in drainage runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDomestic foul drainage\u003c\/strong\u003e: Used in housing for sewer and soil pipe connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water systems\u003c\/strong\u003e: Suitable for stormwater and rainwater layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair work\u003c\/strong\u003e: Adds flexibility for system alterations or patching damaged sections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Cut pipe ends square, chamfer edges, and clean before joining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointing\u003c\/strong\u003e: Push plain-ended pipe into socket until fully seated against seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal care\u003c\/strong\u003e: Avoid damaging rubber seal during insertion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Position on granular material to ensure support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Use granular surround before final backfill to protect fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: Manufactured to BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Unplasticised PVC (uPVC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Double socket push-fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to corrosion, chemicals, and ground conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Installation must comply with Building Regulations Part H.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"110mm \/ Double Socket \/ 15 Degree","offer_id":53771512774767,"sku":"7001040","price":11.38,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Double Socket \/ 30 Degree","offer_id":53771512807535,"sku":"7001058","price":11.38,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Double Socket \/ 45 Degree","offer_id":53771512840303,"sku":"7001034","price":11.38,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Double Socket \/ 87.5 Degree","offer_id":53771512873071,"sku":"7001061","price":11.38,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Single Socket \/ 15 Degree","offer_id":53771512905839,"sku":"7001041","price":10.31,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Single Socket \/ 30 Degree","offer_id":53771512938607,"sku":"7001059","price":10.31,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Single Socket \/ 45 Degree","offer_id":53771512971375,"sku":"7001035","price":10.31,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Single Socket \/ 87.5 Degree","offer_id":53771513004143,"sku":"7001063","price":10.31,"currency_code":"GBP","in_stock":false},{"title":"160mm \/ Double Socket \/ 15 Degree","offer_id":53771513036911,"sku":"7001078","price":28.73,"currency_code":"GBP","in_stock":false},{"title":"160mm \/ Double Socket \/ 30 Degree","offer_id":53771513069679,"sku":"7001090","price":28.73,"currency_code":"GBP","in_stock":false},{"title":"160mm \/ Double Socket \/ 45 Degree","offer_id":53771513102447,"sku":"7001074","price":32.42,"currency_code":"GBP","in_stock":false},{"title":"160mm \/ Double Socket \/ 87.5 Degree","offer_id":53771513135215,"sku":"7001080","price":32.42,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_UG409_15_Degree_Double_Socket_Short_Radius_Bend.jpg?v=1783758555"},{"product_id":"110mm-polypropylene-double-socket-coupler","title":"110mm Drainage Coupler Double Socket","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Double Socket Drainage Coupler, designed for connecting two plain-ended underground drainage pipes in foul and surface water systems.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eManufactured from durable uPVC to BS EN 1401-1 standards, the coupler provides a strong and reliable connection between pipes. The integrated seal and snap-cap system ensures a secure, watertight joint that can be installed quickly without specialist tools.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThis component is commonly used to extend pipe runs, connect replacement sections, or repair damaged pipework, offering full compatibility with standard 110mm plain-ended underground pipes.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable uPVC body\u003c\/strong\u003e: Strong and lightweight material for long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble socket design\u003c\/strong\u003e: Joins two plain-ended pipes directly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal and snap-cap system\u003c\/strong\u003e: Provides a watertight joint with quick, secure installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion resistant\u003c\/strong\u003e: Will not rust, rot, or degrade underground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile use\u003c\/strong\u003e: Suitable for foul and surface water drainage systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy maintenance\u003c\/strong\u003e: Allows simple replacement of damaged pipe runs without excavation of full lengths.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe extensions\u003c\/strong\u003e: Used to extend existing underground pipe runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepairs\u003c\/strong\u003e: Ideal for connecting replacement pipe sections in damaged systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoul drainage\u003c\/strong\u003e: Suitable for underground sewer connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water systems\u003c\/strong\u003e: Applied in rainwater and stormwater management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing and commercial projects\u003c\/strong\u003e: Widely used in domestic and light commercial drainage schemes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure pipes are cut square, chamfered, and clean before insertion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting\u003c\/strong\u003e: Push the plain ends fully into the coupler sockets until seated against the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal system\u003c\/strong\u003e: Integrated snap-cap and rubber seal ensure watertight performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment\u003c\/strong\u003e: Check correct gradient and alignment before backfilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Use granular surround material to protect the joint.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: Manufactured in accordance with BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm diameter, double socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Unplasticised PVC (uPVC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection type\u003c\/strong\u003e: Seal and snap-cap push-fit system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: For underground foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to chemicals, corrosion, and long-term ground exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Install to Building Regulations Part H requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"110mm","offer_id":53771513167983,"sku":"7001033","price":5.74,"currency_code":"GBP","in_stock":false},{"title":"160mm","offer_id":53771513200751,"sku":"7001072","price":13.13,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_UG402_Polypropylene_Double_Socket_Coupler.jpg?v=1783758556"},{"product_id":"110mm-45-degree-equal-junction-double-socket","title":"110mm Drainage Equal Junction Double Socket 45 Degree","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Underground Drainage Equal Junction manufactured from uPVC to BS EN 1401-1, designed for underground foul and surface water systems. This junction provides two equal 110mm connections, ensuring full compatibility with standard underground drainage systems.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eIt features double push-fit sockets for connecting plain-ended pipes, forming watertight joints without additional couplers.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eSupplied as a 45° equal junction, it introduces a shallow branch into a main run, allowing two pipe lines to be connected while maintaining smoother flow and reducing turbulence.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003euPVC construction\u003c\/strong\u003e: Durable and resistant to corrosion, rot, and ground chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEqual sizing\u003c\/strong\u003e: Sockets sized at 110mm for full system compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-fit seals\u003c\/strong\u003e: Built-in gaskets ensure watertight connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick assembly\u003c\/strong\u003e: Connects two plain-ended pipework sections without special tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight handling\u003c\/strong\u003e: Easy to transport, position, and install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45° branch angle\u003c\/strong\u003e: Promotes smoother water flow compared to sharper bends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble socket design\u003c\/strong\u003e: Connects two plain-ended pipes directly, removing the need for separate couplers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-way branching\u003c\/strong\u003e: Creates a 45° two-way junction in underground drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlow optimisation\u003c\/strong\u003e: Introduces multiple branch lines while maintaining efficient flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoul drainage\u003c\/strong\u003e: Used in residential and commercial sewage systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water systems\u003c\/strong\u003e: Suitable for stormwater or rainwater pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem modifications\u003c\/strong\u003e: Allows expansion of existing layouts by adding multiple new branches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard: \u003c\/strong\u003eBS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize: \u003c\/strong\u003e110mm diameter, 45° angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType: \u003c\/strong\u003eEqual junction, double socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial: \u003c\/strong\u003euPVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications: \u003c\/strong\u003eUnderground foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability: \u003c\/strong\u003eResistant to corrosion, chemicals, and long-term ground conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"110mm \/ Double Socket \/ 45 Degree","offer_id":53771513233519,"sku":"7001037","price":18.0,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Double Socket \/ 87.5 Degree","offer_id":53771513266287,"sku":"7001052","price":18.0,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Triple Socket \/ 45 Degree","offer_id":53771513299055,"sku":"7001036","price":19.88,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Triple Socket \/ 87.5 Degree","offer_id":53771513331823,"sku":"7001051","price":19.88,"currency_code":"GBP","in_stock":false},{"title":"160mm \/ Triple Socket \/ 45 Degree","offer_id":53771513364591,"sku":"7001076","price":58.7,"currency_code":"GBP","in_stock":false},{"title":"160mm \/ Triple Socket \/ 87.5 Degree","offer_id":53771513397359,"sku":"7001084","price":58.7,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_UG406_45_Degree_Equal_Junction_Double_Socket.jpg?v=1783758557"},{"product_id":"110mm-lowback-p-trap","title":"110mm Drainage Low Back P Trap Gully 90 Degree","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Low Back P Trap Gully manufactured from durable uPVC to BS EN 1401-1, designed for underground use to collect surface water and discharge it into underground drainage while preventing foul odours from escaping.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe gully incorporates an integral P trap water seal, which maintains a standing water barrier inside the fitting. This prevents gases from the underground drainage system from venting back into the property or outdoor spaces.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSupplied with a 90° low back outlet, it is designed for installations where the outlet pipe must run directly out at a right angle, making it particularly effective for positioning against walls or in confined spaces with limited room for pipework adjustment.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdour prevention\u003c\/strong\u003e: Integral P trap water seal stops foul gases from escaping into the environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003euPVC construction\u003c\/strong\u003e: Durable, lightweight, and resistant to corrosion, rot, and ground chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-fit socket\u003c\/strong\u003e: Accepts plain-ended 110mm pipework securely without additional couplers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water collection\u003c\/strong\u003e: Designed for downpipes, yard drains, and paved area outlets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow maintenance\u003c\/strong\u003e: Accessible design makes inspection and cleaning straightforward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90° low back outlet\u003c\/strong\u003e: Allows pipe runs to exit at right angles, saving space near walls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDownpipe connections\u003c\/strong\u003e: Links roof rainwater downpipes to underground drains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdour control\u003c\/strong\u003e: Maintains a water trap to prevent foul smells from escaping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTight installations\u003c\/strong\u003e: Ideal for locations where the outlet must run at 90° in limited space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaved or yard drainage\u003c\/strong\u003e: Connects open surface gullies or paved channels to the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Excavate and bed the gully on compacted granular material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Insert plain-ended pipe into the push-fit socket until fully seated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e: Ensure the integral trap contains water to maintain the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with suitable granular fill before final backfill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e: Ensure the gully remains accessible for cleaning and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm diameter, 90° outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Low back P trap gully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: uPVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e: Provides reliable water seal against odours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to corrosion, chemicals, and long-term ground conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771513430127,"sku":"7001066","price":23.18,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_UG498_Lowback_P_Trap.jpg?v=1783758558"},{"product_id":"110mm-underground-rectangular-hopper-grid","title":"110mm Drainage Rectangular Hopper and Grid","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Rectangular Hopper and Grid collects surface water from patios, driveways, downpipes, and paved areas and directs it into 110mm underground drainage systems.\u003cbr\u003e\u003cbr\u003eIt features a removable rectangular grating that prevents leaves, litter, and other debris from entering the system, reducing the risk of blockages further downstream. The hopper connects directly to 110mm underground pipework, allowing water to flow efficiently into foul or surface water networks.\u003cbr\u003e\u003cbr\u003eThis type of hopper is typically installed at ground level above a gully or at the head of a pipe run, providing an accessible point for water entry and routine maintenance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDebris protection\u003c\/strong\u003e: Integrated rectangular grid prevents blockages by keeping out large debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110mm connection\u003c\/strong\u003e: Direct connection into underground drainage pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable uPVC construction\u003c\/strong\u003e: Resistant to corrosion, rot, and ground conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy maintenance\u003c\/strong\u003e: Grid is removable for cleaning and clearing silt or debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile use\u003c\/strong\u003e: Can be fitted in driveways, patios, and paved areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRectangle profile\u003c\/strong\u003e: Provides greater intake capacity than square alternatives, suited to larger paved areas or higher water run-off.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriveway drainage\u003c\/strong\u003e: Captures runoff from vehicle hardstandings and paved access areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatio water control\u003c\/strong\u003e: Prevents pooling by directing water into underground pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDownpipe discharge\u003c\/strong\u003e: Receives rainwater from vertical roof downpipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlockage prevention\u003c\/strong\u003e: Stops leaves and debris from entering the underground system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral surface drainage\u003c\/strong\u003e: Provides a neat and effective collection point at ground level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcavation\u003c\/strong\u003e: Install flush with finished ground or paving level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Fit directly to 110mm underground pipe or gully inlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid fitting\u003c\/strong\u003e: Ensure grid is securely seated but removable for maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with concrete or suitable material to prevent movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance\u003c\/strong\u003e: Remove grid periodically to clear debris.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: Manufactured to BS EN 1401-1 for underground drainage components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm outlet, rectangular hopper and grid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: uPVC with durable plastic grating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e: Collects and filters surface water effectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to chemicals, weathering, and long-term burial.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Rectangular","offer_id":53771513462895,"sku":"7001019","price":24.7,"currency_code":"GBP","in_stock":false},{"title":"Square","offer_id":53771513495663,"sku":"7001045","price":13.24,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/110mm_Underground_Rectangular_Hopper_Grid_-_Photo.jpg?v=1783758558"},{"product_id":"110mm-87-5-degree-double-socket-long-radius-rest-bend","title":"110mm Drainage Rest Bend Double Socket 87.5 Degree","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Underground Drainage Rest Bend manufactured from uPVC, compliant with BS EN 1401-1 for use in foul and surface water systems. \u003cbr\u003e\u003cbr\u003eIts uPVC construction provides strength, durability, and long-term resistance to corrosion and chemical attack.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThis bend is designed as a rest bend, specifically used at the base of soil stacks to provide a smooth transition from vertical to horizontal drainage. \u003cbr\u003e\u003cbr\u003eIt features push-fit sockets at both ends, allowing secure and watertight connections to plain-ended pipes. \u003cbr\u003e\u003cbr\u003eSupplied as an 87.5° rest bend, it is typically installed at low level, near foundations or beneath floors, to minimise blockages and reduce flow resistance.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty uPVC construction\u003c\/strong\u003e: Provides strength and long service life in buried conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRest bend design\u003c\/strong\u003e: Shaped to guide waste smoothly from vertical stacks into horizontal runs, reducing turbulence and blockages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure push-fit sockets\u003c\/strong\u003e: Connects two plain-ended pipes without separate couplers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical and corrosion resistance\u003c\/strong\u003e: Withstands foul effluent and aggressive ground conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatertight seal\u003c\/strong\u003e: Integrated seals prevent leakage under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of installation\u003c\/strong\u003e: Lightweight and quick to fit, requiring no specialist tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e87.5° bend\u003c\/strong\u003e: Provides a controlled right-angle change of direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble socket connection\u003c\/strong\u003e: Joins two plain-ended pipes directly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoil stack bases\u003c\/strong\u003e: Connects vertical stacks to horizontal drainage at low level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoundation level installations\u003c\/strong\u003e: Used near building foundations where drainage exits to external pipe runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelow-floor drainage\u003c\/strong\u003e: Provides smooth directional change under suspended floors or slabs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoul water systems\u003c\/strong\u003e: Suitable for carrying soil and waste water underground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water drainage\u003c\/strong\u003e: Can also be used for rainwater or stormwater layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Cut plain-ended pipes square, chamfer edges, and clean thoroughly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJointing\u003c\/strong\u003e: Insert pipes into sockets until fully seated against integrated seals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal protection\u003c\/strong\u003e: Avoid damage to rubber rings during assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Place fitting on a granular base to ensure support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with compacted granular material before completing backfill.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: Manufactured to BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm diameter, 87.5° angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Rest bend, double socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Unplasticised PVC (uPVC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to corrosion, chemicals, and long-term ground exposure.\u003c\/li\u003e\n\u003cli\u003e \u003cstrong\u003eImportant note\u003c\/strong\u003e: Installation must comply with Building Regulations Part H for foul drainage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771513528431,"sku":"7001060","price":22.55,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_UG483_87.5_Degree_Double_Socket_Long_Radius_Rest_Bend.jpg?v=1783758559"},{"product_id":"110mm-drainage-square-rodding-point-spigot-plain-ended","title":"110mm Drainage Square Rodding Point Spigot Plain Ended","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Square Rodding Point with plain-ended spigot, manufactured from durable uPVC to BS EN 1401-1 for underground foul and surface water systems.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eDesigned to provide surface-level access into underground drainage, the rodding point allows cleaning and unblocking of pipework using rods or other inspection tools. The square access cover sits flush with ground level and can be removed easily for maintenance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe plain-ended spigot connects directly to a coupler, bend, or fitting, making it suitable for use where a socketed connection is not required.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess for maintenance\u003c\/strong\u003e: Provides rodding entry into 110mm underground pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlain-ended spigot\u003c\/strong\u003e: Fits directly into a coupler or socketed fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare access cover\u003c\/strong\u003e: Flush-fitting lid allows simple removal for rodding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003euPVC construction\u003c\/strong\u003e: Strong, lightweight, and resistant to corrosion and chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem protection\u003c\/strong\u003e: Facilitates easy clearance of blockages without excavation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBS EN compliant\u003c\/strong\u003e: Manufactured to relevant standards for performance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection points\u003c\/strong\u003e: Installed at strategic intervals for cleaning and maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlockage removal\u003c\/strong\u003e: Enables direct rodding access to clear underground pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential systems\u003c\/strong\u003e: Used in domestic foul and surface water networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial drainage\u003c\/strong\u003e: Suitable for larger underground pipe layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning\u003c\/strong\u003e: Install at accessible points for inspection and rodding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Insert plain-ended spigot into coupler or socket fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeating\u003c\/strong\u003e: Ensure access cover is flush with final ground level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with suitable granular fill for stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e: Keep cover clear for ongoing maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm outlet, plain-ended spigot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Square rodding point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: uPVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e: Provides secure inspection and cleaning access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to chemicals, weathering, and long-term ground conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Plain Ended","offer_id":53771513561199,"sku":"7001397","price":29.6,"currency_code":"GBP","in_stock":false},{"title":"Single Socket","offer_id":53771513593967,"sku":"7001398","price":32.77,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/D883_110mm_Drainage_Square_Rodding_Point_Spigot_Plain_Ended_-_Photo.jpg?v=1783758560"},{"product_id":"110mm-45-degree-universal-gully-trap-315mm-x-130mm","title":"110mm Drainage Universal P Trap Gully 45 Degree","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Underground Drainage Universal P Trap Gully manufactured from durable uPVC to BS EN 1401-1, designed to prevent foul odours from escaping the drainage system while providing a secure connection for surface water.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe gully incorporates an integral P trap water seal, which maintains a standing water barrier inside the fitting. This prevents gases from the underground drainage system from venting back into the property or outdoor spaces.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSupplied with a 45° outlet, it allows the discharge pipe to leave the gully at an angled direction, making it particularly suitable for installations where the pipe run needs to divert away from the gully position while maintaining smooth flow.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdour prevention\u003c\/strong\u003e: Integral P trap water seal stops foul gases from escaping into the environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003euPVC construction\u003c\/strong\u003e: Durable, lightweight, and resistant to corrosion, rot, and ground chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-fit socket\u003c\/strong\u003e: Accepts plain-ended 110mm pipework securely without additional couplers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water collection\u003c\/strong\u003e: Designed for downpipes, yard drains, and paved area outlets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow maintenance\u003c\/strong\u003e: Accessible design makes inspection and cleaning straightforward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45° angled outlet\u003c\/strong\u003e: Provides directional flexibility when connecting the outlet pipe.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water drainage\u003c\/strong\u003e: Connects rainwater downpipes or paved area drainage to underground systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdour control\u003c\/strong\u003e: Maintains a sealed barrier to prevent foul smells from venting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled layouts\u003c\/strong\u003e: Ideal where the discharge pipe needs to leave the gully at 45°.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResidential and commercial use\u003c\/strong\u003e: Suitable for both domestic properties and larger building sites.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Excavate and bed the gully on compacted granular material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Insert plain-ended pipe into the push-fit socket until fully seated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e: Ensure the integral trap contains water to maintain the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with suitable granular fill before final backfill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess\u003c\/strong\u003e: Ensure the gully remains accessible for cleaning and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm diameter, 45° outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Universal P trap gully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: uPVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e: Provides reliable water seal against odours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to corrosion, chemicals, and long-term ground conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771513626735,"sku":"7001044","price":18.77,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_UG413_110mm_Universal_Gully_Trap_45_Degree.jpg?v=1783758561"},{"product_id":"110mm-drainage-universal-rainwater-adaptor","title":"110mm Drainage Universal Rainwater Adaptor","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Universal Rainwater Adaptor designed to connect vertical rainwater downpipes into 110mm underground drainage, forming a watertight joint that channels roof water safely into the system. \u003cbr\u003e\u003cbr\u003eManufactured from durable uPVC to BS EN 1401-1, it provides a straightforward solution for linking gutter outlets and rainwater pipes to underground runs without leakage.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe adaptor accepts a variety of common downpipe sizes, ensuring compatibility with most domestic and light commercial rainwater systems. Once fitted, it creates a sealed connection, preventing water loss at the junction and ensuring roof runoff is directed efficiently into foul or surface water drains.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eBy providing a secure transition between above-ground rainwater systems and underground drainage, the adaptor helps protect buildings and paved areas from pooling or uncontrolled surface runoff.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal connection\u003c\/strong\u003e: Accepts a range of standard rainwater downpipe sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110mm compatibility\u003c\/strong\u003e: Fits directly into 110mm underground drainage pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatertight joint\u003c\/strong\u003e: Prevents leakage at the point where downpipes discharge into drains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable uPVC construction\u003c\/strong\u003e: Resistant to corrosion, rot, and long-term ground exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick installation\u003c\/strong\u003e: Push-fit design simplifies fitting without specialist tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration\u003c\/strong\u003e: Provides a simple link between roof guttering and underground drainage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoof drainage\u003c\/strong\u003e: Connects rainwater downpipes from gutters directly to underground drains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water management\u003c\/strong\u003e: Ensures controlled discharge into foul or stormwater networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofit work\u003c\/strong\u003e: Adds new downpipe connections to existing underground pipe runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral drainage\u003c\/strong\u003e: Provides a reliable link between external rainwater outlets and 110mm pipework.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Cut and chamfer pipe ends for smooth insertion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Insert the downpipe into the adaptor and secure into 110mm underground pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e: Ensure seals are correctly seated for a watertight fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport\u003c\/strong\u003e: Provide adequate support for vertical downpipes above ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting\u003c\/strong\u003e: Check all joints for leaks before backfilling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm outlet with universal downpipe compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Universal rainwater adaptor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: uPVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to weathering, chemicals, and long-term burial.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771513659503,"sku":"7001401","price":11.12,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/D96_110mm_Drainage_Universal_Rainwater_Adaptor_-_Photo.jpg?v=1783758561"},{"product_id":"110mm-drainage-universal-waste-adaptor","title":"110mm Drainage Universal Waste Adaptor","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Universal Waste Adaptor designed to connect smaller domestic waste pipes into underground drainage systems, ensuring a secure and watertight size transition. \u003cbr\u003e\u003cbr\u003eManufactured from durable uPVC to BS EN 1401-1, it provides compatibility between common internal waste pipe diameters and standard 110mm underground pipework.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThis adaptor allows waste pipes from sinks, baths, appliances, or rainwater outlets to discharge directly into the underground system without the need for complex fittings. \u003cbr\u003e\u003cbr\u003eThe universal design accommodates a range of smaller pipe sizes, providing a reliable and practical connection point.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eBy ensuring correct integration of above-ground waste and rainwater pipes, the adaptor helps maintain system performance and prevents leaks or backflow at the junction.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal connection\u003c\/strong\u003e: Accepts multiple common waste pipe diameters for versatility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110mm compatibility\u003c\/strong\u003e: Fits directly into standard 110mm underground drainage pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatertight seal\u003c\/strong\u003e: Provides a secure transition between pipe sizes without leakage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable uPVC construction\u003c\/strong\u003e: Resistant to corrosion, rot, and ground conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick installation\u003c\/strong\u003e: Push-fit design simplifies fitting without specialist tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration\u003c\/strong\u003e: Enables domestic waste pipes to discharge directly into foul or surface water drains.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDomestic waste pipes\u003c\/strong\u003e: Connects sink, bath, shower, or appliance pipes into the underground system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRainwater outlets\u003c\/strong\u003e: Adapts smaller rainwater downpipes to 110mm drains\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrofit connections\u003c\/strong\u003e: Adds new waste connections to existing underground systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral drainage\u003c\/strong\u003e: Provides a simple size transition where smaller waste pipes meet 110mm pipework.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Cut and chamfer pipe ends, ensuring smooth surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Insert smaller waste pipe into the adaptor and secure into 110mm underground pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e: Ensure gaskets are properly seated for a watertight fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport\u003c\/strong\u003e: Provide adequate support to connected waste pipework above ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting\u003c\/strong\u003e: Check joints for watertightness before backfilling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm outlet with universal waste pipe compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Universal adaptor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: uPVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water drainage connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to chemicals, weathering, and long-term burial.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771513692271,"sku":"7001400","price":7.07,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/D95_110mm_Drainage_Universal_Waste_Adaptor_-_Photo.jpg?v=1783758562"},{"product_id":"110mm-socket-plug","title":"110mm Socket Plug Grey\/White\/Anthracite","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Socket Plug designed to seal the socket of an underground drainage fitting or pipe, either permanently or temporarily during installation and testing. By closing off unused sockets, it prevents water ingress, foul odours, and debris from entering the system.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eManufactured from durable uPVC and available in grey, white, or anthracite finishes, the plug fits directly into 110mm push-fit sockets to create a secure, watertight seal without the need for specialist tools.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSocket plugs are commonly used to cap future connection points, isolate branches during construction, or close off lines for air or water pressure testing, ensuring flexibility and reliability in underground drainage layouts.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure closure\u003c\/strong\u003e: Provides a watertight seal for unused 110mm sockets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemporary or permanent use\u003c\/strong\u003e: Suitable for capping during installation, testing, or long-term isolation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable uPVC\u003c\/strong\u003e: Resistant to rot, corrosion, and ground chemicals for reliable performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-fit design\u003c\/strong\u003e: Installs quickly without adhesives or mechanical fixings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour choice\u003c\/strong\u003e: Available in grey, white, or anthracite to match existing fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem compatibility\u003c\/strong\u003e: Fits all standard 110mm underground drainage sockets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem testing\u003c\/strong\u003e: Seals pipework during air or water pressure testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnused branches\u003c\/strong\u003e: Closes off future connections in underground layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemporary isolation\u003c\/strong\u003e: Provides a quick closure point during staged installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent sealing\u003c\/strong\u003e: Caps redundant sockets or fittings to prevent infiltration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure socket is clean and free of debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting\u003c\/strong\u003e: Insert plug firmly into the 110mm socket until fully seated against the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting\u003c\/strong\u003e: For pressure tests, confirm the seal holds without movement or leakage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoval\u003c\/strong\u003e: If temporary, simply withdraw by hand when the socket is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Ensure capped sockets are adequately supported before final backfill.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: Compatible with BS EN 1401-1 fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm socket plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: uPVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours\u003c\/strong\u003e: Grey, white, anthracite.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to chemicals, weathering, and long-term burial.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771513725039,"sku":"7001049","price":12.55,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_UG420_Socket_Plug.jpg?v=1783758563"},{"product_id":"110mm-spare-blanking-plugs","title":"110mm Spare Blanking Plug","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Spare Blanking Plug designed to seal the end of an underground drainage pipe. It provides a watertight closure, either as a temporary stop during installation and testing or as a permanent cap to isolate unused pipe runs.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eManufactured from durable uPVC to BS EN 1401-1 standards, the blanking plug is resistant to corrosion, rot, and ground chemicals. \u003cbr\u003e\u003cbr\u003eIts simple push-fit design allows quick installation without adhesives or mechanical fixings, ensuring secure performance in both foul and surface water drainage systems.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eCommonly used during staged works, the plug prevents water ingress, debris accumulation, or foul odours from escaping unfinished pipework, maintaining system integrity until full connection is required.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe end closure\u003c\/strong\u003e: Seals 110mm pipe ends securely in underground systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemporary or permanent use\u003c\/strong\u003e: Suitable for short-term works or long-term isolation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatertight seal\u003c\/strong\u003e: Prevents leakage, odours, and debris entry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-fit design\u003c\/strong\u003e: Quick to fit and remove without specialist tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable uPVC construction\u003c\/strong\u003e: Resistant to weathering, ground movement, and chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards compliant\u003c\/strong\u003e: Compatible with BS EN 1401-1 drainage components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem testing\u003c\/strong\u003e: Caps pipe ends during air or water pressure tests.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStaged installations\u003c\/strong\u003e: Temporarily seals open pipes while further works are completed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent isolation\u003c\/strong\u003e: Caps redundant or unused drainage runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlockage prevention\u003c\/strong\u003e: Stops debris entering open pipework during construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure pipe end is cut square, clean, and free from debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting\u003c\/strong\u003e: Push plug firmly into the pipe until seated against the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting\u003c\/strong\u003e: Check joint integrity where plugs are used for pressure testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoval\u003c\/strong\u003e: Withdraw plug by hand if re-access to the pipe is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Support sealed pipe ends with granular material before final backfill.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: BS EN 1401-1 compatible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm plug for plain-ended pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Spare blanking plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: uPVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to long-term ground contact, chemicals, and weathering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771513757807,"sku":"7001056","price":7.2,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_UG445_Spare_Blanking_Plugs_110mm.jpg?v=1783758563"},{"product_id":"110mm-undergournd-plain-ended-pipe-3m","title":"110mm Underground Drainage Pipe Plain Ended 3m","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e110mm Underground Drainage Pipe, plain ended, supplied in a 3m length for use in foul and surface water drainage systems.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eManufactured from uPVC to BS EN 1401-1 standards, this pipe offers a strong, durable, and lightweight solution for underground drainage installations. \u003cbr\u003e\u003cbr\u003eThe plain end allows connection via couplers, bends, junctions, and other fittings, making it a versatile choice for both new systems and repair work.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eAt 3m, the shorter length is ideal for small installations, confined spaces, or targeted repairs, while maintaining full compatibility with standard 110mm fittings.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable uPVC construction\u003c\/strong\u003e: Strong and lightweight material designed for long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlain ended connection\u003c\/strong\u003e: Joins easily with standard couplers and fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion resistant\u003c\/strong\u003e: Will not rust, corrode, or degrade in underground conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance\u003c\/strong\u003e: Suitable for foul and surface water applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight handling\u003c\/strong\u003e: Easy to transport, cut, and install on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical size\u003c\/strong\u003e: 3m length ideal for repairs, short runs, and confined areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoul water drainage\u003c\/strong\u003e: For underground sewage systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water drainage\u003c\/strong\u003e: Used in rainwater disposal and stormwater management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort pipe runs\u003c\/strong\u003e: Convenient for small projects or localised connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepairs and alterations\u003c\/strong\u003e: Suitable for patching damaged sections of existing systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDomestic and light commercial\u003c\/strong\u003e: Commonly used in housing and small developments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcavation\u003c\/strong\u003e: Lay in prepared trenches with appropriate bedding material (e.g. granular fill).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections\u003c\/strong\u003e: Use couplers or fittings to join securely with other 110mm components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFalls\u003c\/strong\u003e: Maintain correct gradients for foul or surface water flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround pipe with suitable granular material before final backfill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting\u003c\/strong\u003e: Use a fine-toothed saw; chamfer edges before joining.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: Manufactured to BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 110mm diameter, 3m length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Unplasticised PVC (uPVC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Suitable for foul and surface water drainage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to corrosion, chemical attack, and long-term underground exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Install in accordance with Building Regulations Part H.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"110mm \/ Plain Ended \/ 3000mm","offer_id":53771513790575,"sku":"7001028","price":15.72,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Plain Ended \/ 6000mm","offer_id":53771513823343,"sku":"7001027","price":31.45,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Single Socket \/ 3000mm","offer_id":53771513856111,"sku":"7001030","price":16.34,"currency_code":"GBP","in_stock":false},{"title":"110mm \/ Single Socket \/ 6000mm","offer_id":53771513888879,"sku":"7001029","price":32.69,"currency_code":"GBP","in_stock":false},{"title":"160mm \/ Single Socket \/ 3000mm","offer_id":53771513921647,"sku":"7001093","price":44.95,"currency_code":"GBP","in_stock":false},{"title":"160mm \/ Single Socket \/ 6000mm","offer_id":53771513954415,"sku":"7001092","price":89.89,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_Underground_Pipe_Length.jpg?v=1783758564"},{"product_id":"160mm-level-invert-reducer-spigot-x-110mm-socket-terracotta","title":"160mm x 110mm Drainage Level Invert Reducer Single Socket","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e160mm x 110mm level invert reducer with a single socket connection, designed for underground foul and surface water drainage systems. \u003cbr\u003e\u003cbr\u003eThis fitting reduces pipe size from 160mm to 110mm while maintaining a consistent invert level, ensuring that pipe gradients and flow efficiency are not compromised.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eManufactured from durable uPVC to BS EN 1401-1 standards, the reducer provides a watertight push-fit joint for plain-ended pipework. \u003cbr\u003e\u003cbr\u003eThe single socket design allows direct connection into a larger 160mm drainage run without requiring additional couplers.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eLevel invert reducers are particularly useful in systems where a smaller branch line must connect seamlessly into a high-capacity main drain, ensuring smooth transitions and reliable hydraulic performance.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003euPVC construction\u003c\/strong\u003e: Strong, durable, and resistant to ground chemicals, rot, and corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel invert design\u003c\/strong\u003e: Maintains correct pipe fall and flow performance when reducing size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize compatibility\u003c\/strong\u003e: Connects 160mm drainage runs to 110mm pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle socket fitting\u003c\/strong\u003e: Accepts a plain-ended 110mm pipe directly into the reducer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatertight seal\u003c\/strong\u003e: Integrated push-fit gasket ensures leak-free joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight handling\u003c\/strong\u003e: Easy to transport, position, and install on site.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize reduction\u003c\/strong\u003e: Transitions from a 160mm main drain to a 110mm branch while maintaining invert levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoul drainage\u003c\/strong\u003e: Connects smaller sewer lines into larger mains without affecting flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water systems\u003c\/strong\u003e: Links rainwater or stormwater pipes of different diameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem integration\u003c\/strong\u003e: Enables mixed-diameter layouts in residential or commercial drainage networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic efficiency\u003c\/strong\u003e: Prevents step changes in invert levels, reducing the risk of silt build-up.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Cut and chamfer pipe ends, ensuring smooth surfaces before jointing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Insert the 110mm plain-ended pipe fully into the socket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment\u003c\/strong\u003e: Ensure correct gradient is maintained throughout the drainage run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Place the reducer on compacted granular material for full support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with granular fill before final backfill to protect the joint.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: Manufactured to BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 160mm x 110mm reducer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Level invert, single socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Unplasticised PVC (uPVC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Suitable for underground foul and surface water drainage systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e: Maintains invert level while reducing diameter for smooth flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to corrosion, chemicals, and long-term ground exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"Default Title","offer_id":53771513987183,"sku":"7001083","price":26.86,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_Level_Invert_Reducer_160mm_Spigot_x_110mm_Socket_Terracotta_UG621.jpg?v=1783758565"},{"product_id":"160mm-unequal-junction-double-socket-45-degree-terracotta-160mm-x-160mm-x-110mm","title":"160mm x 110mm Drainage Unequal Junction Double Socket 45 Degree","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003e160mm x 110mm unequal junction with a double socket design and a 45-degree entry to link a smaller 110mm branch into a 160mm drainage run. Manufactured to BS EN 1401-1 standards, it ensures durable, watertight connections in underground foul and surface water networks.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe unequal design enables different pipe diameters to integrate within a single drainage layout, making it a practical solution for systems where a 110mm line must feed into a larger 160mm run.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eWith a shallow 45-degree branch angle, the fitting reduces flow turbulence and helps maintain hydraulic efficiency across the system. Its double socket ends allow direct push-fit connection of plain-ended pipes without the need for separate couplers.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable uPVC body\u003c\/strong\u003e: Resistant to corrosion, chemicals, and long-term ground exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEqual compatibility\u003c\/strong\u003e: Connects a 160mm main pipe with a 110mm branch for mixed-size layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatertight seals\u003c\/strong\u003e: Integrated push-fit sockets with rubber gaskets provide reliable joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight handling\u003c\/strong\u003e: Easy to position, cut, and install with standard tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble socket design\u003c\/strong\u003e: Allows direct connection of plain-ended pipes without extra fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45-degree branch entry\u003c\/strong\u003e: Ensures a smoother transition than sharper junctions, reducing blockages.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize transition\u003c\/strong\u003e: Links 110mm branch pipework into a 160mm main drainage run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoul water drainage\u003c\/strong\u003e: Suitable for connecting domestic or commercial sewer pipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface water management\u003c\/strong\u003e: Integrates rainwater or stormwater pipes into larger networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem expansion\u003c\/strong\u003e: Adds new branch connections to existing 160mm underground layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic efficiency\u003c\/strong\u003e: Maintains smoother flow by diverting at a shallow angle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Cut and chamfer pipe ends, ensuring smooth edges before jointing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: Push plain-ended 110mm and 160mm pipes fully into the sockets until seated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal protection\u003c\/strong\u003e: Avoid twisting or damaging the rubber seals during insertion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedding\u003c\/strong\u003e: Place on a suitable granular bed for support and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackfilling\u003c\/strong\u003e: Surround with compacted granular material before final backfill.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: Manufactured to BS EN 1401-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 160mm x 110mm, 45-degree angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Unequal junction, double socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Unplasticised PVC (uPVC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Underground foul and surface water systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e: Provides secure, watertight size transition with minimal flow disruption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Resistant to corrosion, ground chemicals, and long-term burial conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Unbranded","offers":[{"title":"45 Degree","offer_id":53771514019951,"sku":"7001087","price":36.95,"currency_code":"GBP","in_stock":false},{"title":"87.5 Degree","offer_id":53771514052719,"sku":"7001407","price":36.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Polypipe_160mm_Unequal_Junction_Double_Socket_45_Degree_160x160x110_Terracotta_UG636.jpg?v=1783758566"}],"url":"https:\/\/supplyyard.co.uk\/collections\/drainage.oembed?page=2","provider":"Supply Yard","version":"1.0","type":"link"}