{"title":"Screeding \u0026 Floor Levelling Compound","description":"","products":[{"product_id":"bostik-cempolatex-latex-sub-floor-levelling-compound-20kg","title":"Bostik Cempolatex Latex Sub-Floor Levelling Compound 20kg","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eBostik Cempolatex Self-Smoothing Compound supplied as a grey, cement-based powder for mixing with water to form a free-flowing, self-levelling liquid. \u003cbr\u003e\u003cbr\u003eDesigned for interior use, it provides a rapid-setting, durable base for floor coverings on a wide range of prepared sub-floors. The latex-modified formulation gives enhanced flexibility and adhesion, forming a sound, smooth surface ready to receive resilient, textile, wood, or ceramic finishes. \u003cbr\u003e\u003cbr\u003eIt is not intended as a final wearing surface and must always be covered with a suitable floor finish. The product is typically applied between 3mm and 12mm in a single application.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Flexibility\u003c\/strong\u003e: Latex modification allows for minor substrate movement, ideal for suspended timber and mixed sub-floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid Setting and Drying\u003c\/strong\u003e: Accepts light foot traffic after approximately 4 hours and most floor coverings within 16-24 hours at 20°C and 3mm thickness, supporting fast-track installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Adhesion\u003c\/strong\u003e: Bonds strongly to a wide range of properly prepared substrates, including concrete, screeds, stone, brick, terrazzo, and rigid plywood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Smoothing Performance\u003c\/strong\u003e: High-flow formulation enables easy application and a level, uniform finish with minimal trowelling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtein-Free Composition\u003c\/strong\u003e: Eliminates the risk of adverse reactions with sensitive adhesives and maintains suitability in hygienic environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderfloor Heating Compatible\u003c\/strong\u003e: Suitable for use over piped warm water underfloor heating systems when used as a levelling layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Application Thickness\u003c\/strong\u003e: Can be applied between 3mm and 12mm in a single pour, with deeper isolated repairs achievable up to 100mm when used in conjunction with Bostik SBR.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior Floor Levelling\u003c\/strong\u003e: Smooths and levels uneven sub-floors prior to installation of new floor coverings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResilient Flooring Preparation\u003c\/strong\u003e: Provides a stable, smooth surface for vinyl, LVT, and rubber flooring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTile and Stone Finishes\u003c\/strong\u003e: Creates a reliable, even substrate for ceramic or natural stone tiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimber and Textile Coverings\u003c\/strong\u003e: Suitable for use beneath carpet, wood, and laminate floors where a level base is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderfloor Heating Systems\u003c\/strong\u003e: Appropriate for application over embedded warm water heating systems under controlled installation conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Preparation\u003c\/strong\u003e: Surfaces must be clean, dry, sound, and free from contaminants such as dust, grease, or existing adhesive residues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePriming\u003c\/strong\u003e: Always apply a Bostik-recommended primer appropriate to the substrate to minimise absorption, prevent pinholes, and optimise adhesion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing\u003c\/strong\u003e: Add powder gradually to the specified quantity of clean, cold water and mix mechanically for a minimum of 2 minutes until smooth and lump-free. Do not over-water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Pour immediately onto the primed surface and spread with a steel trowel or float to the desired thickness. Maintain a wet edge to blend pours seamlessly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing\u003c\/strong\u003e: Use a spiked roller to remove air and improve surface uniformity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderfloor Heating Procedure\u003c\/strong\u003e: Heating must be switched off 48 hours before application, remain off during curing, and be reintroduced gradually after 48 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Composition\u003c\/strong\u003e: Cement-based powder incorporating latex modification for flexibility and strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance Properties\u003c\/strong\u003e: Rapid-setting formulation supporting foot traffic within 4 hours and floor coverings after 16–24 hours (3mm thickness at 20°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Compatibility\u003c\/strong\u003e: Adheres to concrete, sand\/cement screeds, calcium sulphate screeds, mastic asphalt (subject to priming), rigid plywood, and firmly bonded ceramic or quarry tiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Limitation\u003c\/strong\u003e: Interior use only; not suitable as a final wear surface or for use over water-soluble contaminants or adhesive residues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderfloor Heating Use\u003c\/strong\u003e: Suitable only for warm water systems when used as a levelling compound; not for filling or topping applications with UFH or mastic asphalt bases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant Note\u003c\/strong\u003e: Ensure all substrates are properly prepared and primed. Do not apply over flexible or poorly ventilated timber structures. The product must always be covered with a suitable floor finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bostik","offers":[{"title":"Default Title","offer_id":53771510513775,"sku":"6003080","price":25.51,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Bostik_Latex_-_Photo.jpg?v=1783758533"},{"product_id":"bostik-cempolay-deep-floor-levelling-compound-grey-20kg","title":"Bostik Cempolay Deep Floor Levelling Compound Grey 20kg","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eBostik Cempolay Deep Floor Levelling Compound in a 20kg bag. This high-strength, protein-free, cement-based levelling compound is designed for deep internal applications. It levels and smooths uneven subfloors, capable of building up from 5mm to 50mm in a single pour. \u003cbr\u003e\u003cbr\u003eThe formulation combines selected cements and organic binders to produce a robust, free-flowing mortar that transforms irregular subfloors into a flat, load-bearing surface ready for a wide range of floor coverings. \u003cbr\u003e\u003cbr\u003eOnce mixed with water, the compound develops a smooth, easily workable consistency with excellent flow and rapid hardening characteristics. \u003cbr\u003e\u003cbr\u003eIts protein-free composition reduces the risk of bacterial growth, making it suitable for hygiene-sensitive areas in healthcare or food preparation environments.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide application thickness\u003c\/strong\u003e: Levels from 5mm to 50mm in a single application, ideal for significant height corrections and deep filling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh strength and durability\u003c\/strong\u003e: Creates a dense, load-bearing surface suitable for light to heavy-duty interior traffic prior to floor covering installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtein-free formulation\u003c\/strong\u003e: Prevents biological contamination, ensuring suitability in hospitals, kitchens, and other hygiene-critical areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent workability\u003c\/strong\u003e: Free-flowing mortar with a 15-20 minute working time for easy application and self-levelling performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid setting\u003c\/strong\u003e: Accepts light foot traffic after approximately 90 minutes, expediting project turnaround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile substrate compatibility\u003c\/strong\u003e: Bonds to concrete, sand\/cement screeds, stone, and properly prepared unglazed tiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderfloor heating compatibility\u003c\/strong\u003e: Suitable for use over warm-water underfloor heating systems when installed to correct specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth finish\u003c\/strong\u003e: Provides a high-quality, even surface for vinyl, carpet, tile, and other bonded coverings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBag size - 20 kg\u003c\/strong\u003e: Supplied in 20kg units to achieve consistent water-to-powder ratio and reliable site handling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevelling uneven subfloors\u003c\/strong\u003e: Corrects irregularities and undulations in concrete or screeded floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaising floor levels\u003c\/strong\u003e: Builds up internal floors to significant heights in one operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilling depressions and trenches\u003c\/strong\u003e: Ideal for filling low spots, voids, or service channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreating sloping screeds\u003c\/strong\u003e: Forms controlled gradients for drainage or transitions between floor levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoothing over existing hard surfaces\u003c\/strong\u003e: Suitable for use over well-bonded, sound subfloors such as concrete, sand\/cement screeds, stone, or unglazed ceramic and quarry tiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for\u003c\/strong\u003e: Use over wooden floors, adhesive residues, mastic asphalt, or areas subject to permanent water immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: Surfaces must be clean, dry, structurally sound, and free of grease, dust, laitance, or contaminants. Mechanical preparation such as grinding or shot blasting may be required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair and inspection\u003c\/strong\u003e: Fill cracks and voids with a suitable repair mortar such as Bostik Rapid Repair Mortar and allow to dry before application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental conditions\u003c\/strong\u003e: Maintain substrate, air, and material temperature between +5°C and +27°C; avoid draughts during curing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio\u003c\/strong\u003e: Add exactly 3.5 litres of clean, cold water per 20 kg bag. Gradually add powder to water while mixing with a heavy-duty drill (minimum 650 rpm) fitted with a mixing paddle. Mix for at least two minutes, allow to stand for one minute, then briefly re-mix.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication process\u003c\/strong\u003e: Pour immediately after mixing, spreading evenly with a steel trowel or gauge rake to the desired thickness. Use a spiked roller within 10–15 minutes to de-aerate and achieve a uniform finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking time\u003c\/strong\u003e: Approximately 15–20 minutes at +20°C. Do not add water to re-temper the mix once it begins to stiffen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying and curing\u003c\/strong\u003e: Protect the surface until set. Allow full drying before applying coverings — typically 24 hours per 5 mm thickness at +20°C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial composition\u003c\/strong\u003e: Cement and polymer binder blend with fine aggregates; free from protein and casein.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication depth\u003c\/strong\u003e: Suitable for single-pour thicknesses between 5 mm and 50 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength\u003c\/strong\u003e: High early and final strength for domestic, commercial, and light-industrial interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking time and trafficability\u003c\/strong\u003e: Approximately 15–20 minutes working time; accepts light foot traffic after 90 minutes at +20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying time before coverings\u003c\/strong\u003e: 4 hours for loose-laid coverings; approximately 24 hours per 5 mm thickness for bonded finishes such as vinyl or wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface moisture\u003c\/strong\u003e: Ensure substrate \u0026lt;75%RH before installation of impervious finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Suitable for use over concrete, screed, stone, and other rigid mineral subfloors; not for exterior or submerged applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards compliance\u003c\/strong\u003e: Subfloor preparation and installation in accordance with BS 8204 (Code of Practice for Concrete Subfloors).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant note\u003c\/strong\u003e: Always follow the manufacturer’s data sheet and safety guidance. Use appropriate PPE during mixing and application, and ensure adequate ventilation throughout the curing process.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bostik","offers":[{"title":"Default Title","offer_id":53771510546543,"sku":"6003081","price":31.27,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Bostik_Deep_Self_Levelling_-_Photo.jpg?v=1783758534"},{"product_id":"bostik-cempolay-self-leveling-compound-25kg","title":"Bostik Cempolay Self Levelling Compound 20kg","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eBostik Cempolay Self Levelling Compound supplied in a 20kg bag. A polymer-modified, protein-free cementitious smoothing compound formulated for levelling uneven internal subfloors prior to installing decorative floor coverings. \u003cbr\u003e\u003cbr\u003eWhen mixed with approximately 4 litres of clean water, it produces a free-flowing slurry that rapidly finds its own level, eliminating ridges and hollows to create a uniform surface. The compound remains workable for 15-20 minutes at 20 °C and accepts light foot traffic within 2-4 hours, with most floor coverings suitable for installation after around 16 hours. \u003cbr\u003e\u003cbr\u003eIts protein-free composition prevents bacterial growth, ensuring suitability for hygiene-critical environments such as hospitals, food-processing zones, and commercial kitchens. \u003cbr\u003e\u003cbr\u003eDesigned exclusively for dry, internal use on concrete, sand\/cement screeds, stone, or firmly bonded unglazed ceramic tiles, it must always be overlaid with a decorative finish and is not suitable for calcium-sulphate screeds, adhesive residues, underfloor heating, or use as a wearing surface.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eFeatures \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolymer-Modified Formulation\u003c\/strong\u003e: Enhances adhesion, flexibility, and surface strength on a wide range of internal substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Setting\u003c\/strong\u003e: Allows light foot traffic in as little as 2–4 hours, reducing project downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Levelling Action\u003c\/strong\u003e: Flows freely to eliminate ridges and hollows, creating a smooth, even surface with minimal trowelling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtein-Free Composition\u003c\/strong\u003e: Contains no casein or protein, ensuring it does not support bacterial growth and is suitable for hygiene-sensitive areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of Application\u003c\/strong\u003e: Mixes readily with water to form a lump-free slurry with a working time of 15–20 minutes for efficient use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Use Only\u003c\/strong\u003e: Formulated solely for dry, internal areas where moisture exposure is controlled.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete Subfloors\u003c\/strong\u003e: Provides a smooth, level finish ready for floor covering installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSand\/Cement Screeds\u003c\/strong\u003e: Corrects uneven surfaces to ensure an even substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnglazed Ceramic Tiles\u003c\/strong\u003e: Can be applied directly over firmly bonded unglazed tiles to achieve a flat, uniform layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHygiene and Food Preparation Areas\u003c\/strong\u003e: Ideal for environments requiring resistance to bacterial growth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior Use Only\u003c\/strong\u003e: Designed exclusively for dry, internal applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExclusions\u003c\/strong\u003e: Not suitable for calcium-sulphate screeds, underfloor heating systems, or as a final wearing surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eInstallation Guidance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e: Ensure the substrate is clean, dry, sound, and free from dust, grease, or loose material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing\u003c\/strong\u003e: Combine the 20 kg powder with approximately 4 litres of clean water until a smooth, lump-free consistency is achieved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Pour the mixed compound onto the prepared surface; it will self-level naturally, with a trowel used as needed to assist flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring\u003c\/strong\u003e: Allow to cure before applying further finishes; suitable for light foot traffic within 2–4 hours at 20 °C and generally ready for floor coverings after 16 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal Finish\u003c\/strong\u003e: Always overlay with an appropriate decorative floor covering once cured.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch2\u003eCompliance \u0026amp; Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Composition\u003c\/strong\u003e: Polymer-modified, protein-free, cement-based compound formulated for internal subfloor levelling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking and Setting Time\u003c\/strong\u003e: Workable for 15–20 minutes at 20 °C; foot traffic permissible after 2–4 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor Covering Readiness\u003c\/strong\u003e: Accepts most resilient, textile, or timber coverings after approximately 16 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Suitability\u003c\/strong\u003e: Compatible with concrete, sand\/cement screeds, stone, and bonded unglazed ceramic tiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestrictions\u003c\/strong\u003e: Not suitable for calcium-sulphate screeds, adhesive residues, underfloor heating, or as a final wearing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant Note\u003c\/strong\u003e: For internal dry areas only. Always follow the manufacturer’s technical data sheet for precise mixing ratios, application conditions, and curing guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bostik","offers":[{"title":"Default Title","offer_id":53771510579311,"sku":"6003076","price":16.79,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9784\/4591\/files\/Bostik_Cempolay.jpg?v=1783758534"}],"url":"https:\/\/supplyyard.co.uk\/collections\/screeding-floor-levelling-compound.oembed","provider":"Supply Yard","version":"1.0","type":"link"}