Product Overview
65mm Square Downpipe Offset Bend in Black with a 112.5 degree angle.
This uPVC fitting is designed to alter the direction of 65mm square downpipes to navigate eaves, soffits, or wall projections and is fully compatible with 65mm square downpipe fittings. Manufactured from impact-resistant PVC with UV stability for long service life.
The 112.5 degree angle provides a controlled offset for overcoming building features, while the black finish blends with dark rooflines.
Features & Benefits
- Durable construction: Made from impact-resistant uPVC for long-lasting roofline performance.
- Secure compatibility: Fully compatible with 65mm square fittings for easy connection.
- Directional change: Provides a reliable 112.5 degree offset to overcome building projections.
- Maintained flow: Smooth internal profile supports continuous water discharge through the bend.
- Aesthetic match: Black finish blends with dark rooflines.
- Angle: 112.5 degree angle suited to eaves and intermediate offsets.
Applications
- Eaves clearances: Offsets pipework around soffits and overhangs.
- Wall projections: Navigates irregularities or stepped façades.
- Refurbishment: Replaces damaged offset bends in existing 65mm systems.
- Extensions: Provides directional change on new downpipe installations.
Installation Guidance
- Joint seating: Ensure pipe ends are cut square and inserted fully into the bend.
- Bracket placement: Fit supporting brackets close to the offset to maintain stability.
- Alignment: Confirm correct orientation to achieve the intended projection.
- Seal engagement: Use 65mm square connectors where additional joints are required.
- Inspection: Check periodically for debris accumulation at directional changes.
Compliance & Performance
- Material: Unplasticised polyvinyl chloride (uPVC).
- Temperature performance: Designed for service from -20°C to +60°C.
- UV resistance: Tested to maintain colour and performance over time.
- Load capacity: Conforms to BS EN 12200 for rainwater downpipes.
- Important note: Ensure fittings are not lubricated with petroleum products; use clean water only.