Product Overview
Brown UC3 pressure-treated softwood feather edge fence board, measuring 1650mm in length with a 22mm x 100mm section (finished size approx. 16mm x 94mm). Each board is feathered along its width so it overlaps with its neighbour, forming a strong and continuous face typical of closeboard fencing.
At 1650mm long, it is sized for 5ft fences and fixed vertically to horizontal rails with either timber or concrete posts.
Features & Benefits
- UC3 preservative treatment: Increases durability for long-term external use above ground.
- Pressure-treated softwood: Protects against fungal decay, rot, and insect attack.
- Brown colour tint: Pigment added during treatment for a natural timber tone that blends into garden settings.
- Feather edge profile: Overlapping design improves privacy, wind resistance, and water run-off.
- Natural timber appearance: Complements traditional fencing styles.
- Workable material: Easy to cut and adjust on site for uneven ground or repairs.
- Board length 1650mm: Sized for 5ft fencing projects.
- Section size 22mm x 100mm (nominal): Finished size approx. 16mm x 94mm.
Colour and finish are representative only and may vary slightly as this is a natural product.
Applications
Can be used with 5ft closeboard fencing, or shorter fence lines when combined with gravel boards or trellis.
- Fence panel support (5ft height): Forms the continuous vertical face of a closeboard fence.
- Domestic garden fencing: Defines boundaries with good privacy.
- Panel compatibility: Used to construct closeboard or feather edge fencing.
-
Panel and gravel board use: Always fixed above gravel boards for extended service life.
Installation Guidance
- Ground embedment: Boards must not be set directly into the ground; always use gravel boards.
- Fixing method: Nail or screw vertically to arris rails or backing rails.
-
End grain protection: Treat cut ends with a suitable preservative.
Compliance & Performance
- Preservative treatment: Pressure-treated to UC3 with copper-based preservative.
-
Service class: Suitable for service class 3 external applications.