Product Overview
Bostik Flashband with a 100mm width and 10m length is a heavy-duty, self-adhesive bituminous flashing tape designed to deliver a durable, watertight seal on a broad range of building substrates.
The tape combines a resin-modified bitumen adhesive with a protective foil facing, producing a robust barrier that resists tearing, weathering and thermal cycling. Its pressure-sensitive adhesive bonds securely to brick, masonry, concrete roof tiles, timber, metal and rigid plastics, providing flexibility at low temperatures and resistance to flow at high temperatures for reliable long-term performance.
The adhesive mass strengthens over time, ensuring stability in both exposed and sheltered locations. No separate adhesive or specialist tools are required for application, and the foil surface provides a clean, uniform finish when in place.
The product is suitable for remedial and new-build work where a consistent 100mm width is required.
Features & Benefits
- Self-adhesive construction: Provides a strong, immediate bond without the need for separate adhesives, enabling rapid installation.
- Watertight sealing layer: Creates a durable weatherproof barrier that prevents water ingress across joints, laps and interfaces.
- Robust foil facing: Offers tear resistance and stabilises the tape under thermal and mechanical stress for dependable service life.
- Good substrate compatibility: Bonds effectively to common building materials including masonry, concrete tiles, timber, metal and rigid plastics.
- Temperature-tolerant adhesive: Remains flexible at low temperatures and resists flow at elevated temperatures for reliable year-round performance.
-
Width specification: 100mm is suitable for general-purpose detailing, offering a balanced sealing width for roof edges, small upstands and standard repair zones.
Applications
- Roof flashing repairs: Restores watertightness around chimneys, parapets and roof penetrations.
- Joint and lap sealing: Provides a continuous seal over roofing felt joints, slate repairs and small gutter interfaces.
- Emergency waterproofing: Acts as a rapid, self-bonding solution for leaks during adverse weather.
-
Decorative over-bridging: Accepts over-painting where required, subject to compatibility testing.
Installation Guidance
- Surface preparation: Ensure all substrates are clean, dry and free from contaminants, with hollows over 3mm filled before application.
- Primer use: Apply Flashband Primer Emulsion or Primer S.V. on porous or rough substrates to improve adhesion, allowing it to dry fully before use.
- Tape positioning: Remove a short section of release backing, align the tape and apply progressively to avoid creasing.
- Bond consolidation: Press into place using hand pressure, then roll firmly to expel air and secure all edges and overlaps.
-
Overlap formation: Maintain a minimum 25mm overlap between adjacent strips to achieve a watertight seal.
Compliance & Performance
- Material composition: Resin-modified bituminous adhesive mass with a protective foil facing for reinforcement and weather resistance.
- Service temperatures: Performs within -10°C to +100°C, depending on operating conditions.
- Application temperature window: Substrate surface must be between +5°C and +30°C for correct adhesion.
- Storage conditions: Store unopened rolls in cool, dry conditions between +5°C and +25°C, protected from frost and direct sunlight.
- Important note: Flashband must not contact silicone sealants, flexible PVC, vinyl or solvent-rich environments and is not suitable for areas subject to foot or vehicular traffic.