Product Overview
Metal Hammer Fixings with a 6mm shank diameter and 30mm length. These fixings provide a rapid installation method for securing materials to masonry, concrete, and blockwork.
Manufactured with a durable zinc-plated steel nail and precision-formed expansion sleeve, they ensure a tight and secure fixing once driven into position.
Designed for use with timber battens, frames, and metal brackets, these fixings enable clean, flush installation with minimal drilling time.
The 6mm shank diameter provides accurate drilling alignment and controlled expansion for consistent retention across all substrate types. The 30mm length offers shallow embedment suitable for surface or lightweight fixings where shorter penetration is sufficient.
Features & Benefits
- Fast installation: Hammer-driven design eliminates the need for screw tightening.
- Secure hold: Steel expansion action provides firm anchorage in solid substrates.
- Durable finish: Zinc-plated steel resists corrosion and wear.
- Reliable performance: Withstands vibration and thermal movement without loosening.
- Versatile use: Suitable for masonry, concrete, and blockwork.
- 6mm shank diameter: Matches standard masonry bit size for quick drilling, controlled expansion, and strong retention in dense substrates.
- 30mm length: Suited to shallow embedment in block or brick for light fixings such as battens or clips.
Applications
- Timber battens: For securing battens to block or concrete walls.
- Frames and brackets: For fixing lightweight frames or support brackets.
- Electrical trunking: For attaching conduit clips or surface trunking to masonry.
- Light fittings: For anchoring smaller fittings or fixtures.
Installation Guidance
- Drill preparation: Use a 6mm masonry bit to the required depth.
- Clean hole: Remove dust to ensure correct expansion.
- Insert fixing: Place through fixture and into the hole.
- Drive nail: Hammer in the steel pin until fully seated and expanded.
- Final check: Ensure fixing is flush and secure against the surface.
Compliance & Performance
- Material specification: Zinc-plated steel nail with precision-formed steel sleeve.
- Performance rating: Suitable for light-duty loads in solid masonry or concrete.
- Corrosion protection: Complies with standard indoor exposure conditions.
- Installation safety: Eye protection recommended during hammering.
- Important note: Do not reuse or overtighten; always confirm substrate integrity before installation.