Product Overview
Everbuild One Strike Filler supplied in a 1 litre tub is a lightweight, ready-to-use filler formulated for high-capacity repair work on plaster, wood, stone, and masonry.
Made with advanced polymeric microfillers, it provides a smooth, professional finish in a single application without shrinkage, sagging, or cracking. The large-format tub is designed for efficient use on wide surface areas and multiple repair jobs, offering excellent value and consistent coverage. Once applied, it dries to a brilliant white finish ready for immediate decoration.
This advanced filler is engineered for both interior and exterior use where fast, durable repair performance is required. Its rapid-drying composition enables sanding-free finishing and overpainting within 30 minutes for water-based coatings.
The 1L pack size is ideal for decorators, contractors, and maintenance teams needing a high-volume filler for continuous use across large projects or recurring repair work.
Features & Benefits
- Lightweight polymer formula: Provides a smooth, non-sagging paste that bonds firmly without shrinkage or cracking.
- One-coat application: Fills deep gaps and holes up to 75mm in a single layer, eliminating the need for multiple coats.
- Rapid drying: Ready to paint or wallpaper after approximately 30 minutes under standard conditions.
- Paint-ready surface: Dries brilliant white with a smooth finish suitable for immediate overpainting or staining.
- Large-format tub: Designed for extended use on wide surfaces and multiple areas without frequent replenishment.
- Multi-surface compatibility: Adheres effectively to plaster, brick, stone, render, and wood for versatile repair use.
- Weather-resistant performance: Suitable for interior and exterior use when overpainted externally.
- Non-shrink and non-sag finish: Maintains integrity on ceilings and vertical surfaces without deformation.
- Size – 1 litre tub: Provides high-volume capacity for broad coverage and professional, continuous application.
Applications
- Interior wall repair: Ideal for filling large cracks, gaps, and surface holes in plaster or painted substrates.
- Ceiling restoration: Suitable for overhead work where non-sag performance is essential.
- Woodwork finishing: Repairs extensive defects in doors, trims, and skirting boards before decoration.
- Masonry patching: Smooths larger voids and surface damage in stone, brick, or render.
- Pre-decorating preparation: Levels large areas for uniform paint or wallpaper application.
Installation Guidance
- Surface preparation: Ensure all areas are clean, dry, and free from dust, grease, or loose material.
- Product access: Open the tub and remove the required amount using a filling knife, trowel, or broad spatula.
- Application method: Apply directly into the repair area, pressing firmly for full adhesion.
- Finishing technique: Level the surface using a filling knife or suitable smoothing tool.
- Drying and overcoating: Allow to dry for at least 30 minutes before painting with water-based coatings, or 12 hours for solvent-based paints.
- Aftercare: Clean nozzle immediately after use to prevent hardening within the cartridge.
Compliance & Performance
- Material composition: High-strength lightweight polymeric fillers with a density of 0.48–0.53 g/cm³.
- Finish characteristics: Brilliant white, smooth, and paintable surface.
- Performance specification: Maximum fill depth of 75mm in one coat; low movement accommodation.
- Application conditions: Suitable for use between +5°C and +30°C; must not be applied when rain is imminent externally.
- Service suitability: Compatible with most water- and solvent-based paints; internal and external use when overpainted.
- Storage conditions: Store at moderate temperatures; shelf life 24 months from manufacture.
- Important note: Not suitable for use on plastics or metals. Always overpaint when used externally to ensure weather protection.